Full power
50000...240000
Parallel operation function
是
Rated output voltage
415 V
Nominal input frequency
60
Rated output frequency
60
Maximum permissible nominal voltage of rechargeable batteries
600 V
Communication interface
RS232, RS485, SNMP, CAN
Minimum battery life at design load
5
Possibility to connect external batteries
是
Uninterruptible power supply form factor
独立式
Type of batteries used
铅酸,镍镉,锂离子
Display availability
触摸液晶显示屏
Presence of terminal output
是
Earthquake-proof design
可选
Rated power
50000...216000 W
Active power
50000...216000 W
Uninterruptible power supply efficiency
97 %
Minimum permissible nominal voltage of batteries
360 V
Reducing input voltage without switching to battery use
305 V
Increasing the input voltage without switching to battery use
485 V
Permissible operating time at overload 110%
60
Permissible operating time at overload 125%
10
Permissible operating time at overload 150 %
1
Current input nonlinear distortion factor (THDi)
3 %
Output voltage nonlinear distortion coefficient (THDv)
1 %
Output power factor
0.9...1
Maximum ambient temperature
40 °C
Maximum ambient relative humidity
95 %
Estimated load power relative to nominal load power in kW for selecting the autonomous operation time
100 %
Number of battery rooms
1...10 pcs
Height of one battery cabinet
1000...2500 mm
Width of one battery cabinet
500...1500 mm
Depth of one battery cabinet
500...1500 mm
Lower limit of input voltage range (phase-to-neutral) without switching to battery operation mode
138 V
Upper limit of input voltage range (phase-to-neutral) without switching to battery operation mode
485 V
Charger power at rated load power relative to the rating of the uninterruptible power supply, not less than
16 %
Availability of a network card as part of the uninterruptible power supply unit
是的
Space for uninterruptible power supply maintenance
前面800毫米,后面0到500毫米
Integrated N+1 redundancy (module level) for modular uninterruptible power supplies
是
Model architecture of uninterruptible power supply power section
是
Availability of advanced monitoring when using modular batteries
可选
Supports plug-n-play technology when using modular batteries
是
Uninterruptible power supply phase (input:output)
3:3
Nominal input voltage
415 V
Battery arrangement
在UPS内部/外部
Type of battery cabinet design
内置/独立式
Modular uninterruptible power supply battery architecture
是
Redundancy in parallel operation
是
Availability of high energy efficiency mode
是
Charging batteries in high energy efficiency mode
是
Interference correction in high power efficiency mode
是
Zero (0ms) switching time from high energy efficiency mode
是
Uninterruptible power supply load self-test mode with no load connected
是
Power supply voltage
415 V