Relay Time Parameter Measurement Device CHI4018 — ZHAIS LLC

Name: Relay Time Parameter Measurement Device CHI4018
Brand: ЖАИС
SKU: 291410
Availability: InStock

Brend: ЖАИС

so'm 1,890,000 - so'm 6,804,000 UZS

MOQ: 10 pieces

Asosiy xususiyatlar

Circuit resistance of the open circuit of the internal key, not less than: at DC, MΩ: 1; at AC (f=50 Hz), kΩ: 100

Resistance of closed internal key circuit: no more than 0.3 ohm

Уровень ограничения всплесков напряжения на ключе цепи реле: 600 V

Maximum relay winding supply voltage: 380 V

Yetkazib beruvchi haqida ma'lumot

ZHAIS LLC

🇷🇺 📦 🏭 🛡️

Barcha mahsulotlarni ko'rish (12)

Tezkor so'rov

Tavsif

Designed for measuring time parameters of relays when relay windings are powered from an external voltage source of DC up to 10 A at voltage up to 240 V; AC up to 6 A with frequency of 50 Hz at voltage up to 380 V, as well as when the device is not connected to the external power supply of relay windings.

It is used to measure time parameters of various switching products (buttons, toggle switches, switches).

Xususiyatlar

Circuit resistance of the open circuit of the internal key, not less than

at DC, MΩ: 1; at AC (f=50 Hz), kΩ: 100

Resistance of closed internal key circuit

no more than 0.3 ohm

Уровень ограничения всплесков напряжения на ключе цепи реле

600 V

Maximum relay winding supply voltage

380 V

Power consumption

no more than 10 W

Mains frequency

50 ±1%

Supply mains voltage

220+10% - 15% V

Limits of permissible basic error of measurement of relay operation delay time expressed in per cent shall be equal to

δ=±[0.005+0.004*(Xk/X-1)]

Time display limits

99999.9 s with a resolution of 0.1

The device allows to perform

- multiple automatic and manual measurements of the above parameters with averaging of measured values, with the option to select the number of automatic measurement cycles up to 99; - measuring relative time parameters of contacts

The device allows to determine in one measurement cycle one or a group of the following parameters

- measuring relay actuation time with normally open or normally closed contacts, with the option to select measurement variant for each contact; - to first contact actuation; - to full contact actuation considering its bounce; - relay release time with nor

Time of establishment of the operating mode of the device, not less than

Overall dimensions, not more

246 x 198 x 96 mm

Insulation resistance of power supply circuits and relay and contact circuits in relation to the device ground terminal under no

Electrical insulation under normal conditions withstands 1 min of action

insulation withstands for 1 min the action of test voltage 1.5 kV sinusoidal at frequency (50±1) Hz between connected inputs of the power supply circuit and the protective grounding terminal and between connected contacts of the relay circuits and the prot

Weight, not more

1.5 kg

Operation at ambient temperatures

-10...50 °C

Operation at upper relative humidity at 30° C and lower temperatures

Flat grinder, Specialised grinder %

Maximum current through relay circuit (using internal key)

10 A

Maximum current through relay circuit (using external key)

10 A

O'xshash mahsulotlar