Корпусҳои сипарӣ
Корпусҳои сипарии металлӣ
Қуттиҳои тақсимӣ
Кронштейнҳо
Қуттиҳои пластикӣ
Дастгоҳҳои воридотию тақсимотӣ
Қуттиҳои клеммӣ
Корпусҳои сипари ҳисобӣ
Лавозимоти сипарӣ
Қуттиҳои роҳ ва кабел
Шинопроводҳо
Изоляторҳо
Лавозимоти лоткҳо
Каналҳои кабелӣ
Корпусҳои хурдҳаҷм
Сарпӯши лоткҳо
Лоткҳои кабелии нардбонӣ
Лоткҳои кабелии рост
Лоткҳои кунҷӣ
Гардишҳои лоткҳо
Профилҳо ва ДИН-рейкаҳо
Дигар
Маҳсулот — Корпусҳо ва бастагуҳо
Полоса мустаҳкам PMP 50x5, бо андозаи габаритӣ аз 50х2000 мм то 50х6000 мм, бо ғафсии металл 5,0 мм, гармцинкшуда
сом. 32.70-196.20
SZ EMI OJSC 🇷🇺
Reinforced Light Channel KUS 000x00, Sizes 50x50x3000mm to 150x50x3000mm
сом. 52.32-196.20
SZ EMI OJSC 🇷🇺
Traversa profili doib BSUT 85D, ba gabarit haji 220х125х150 mm, ba tholshina metalla 8,0 mm, stal nershavai markai A
сом. 98.10-327
SZ EMI OJSC 🇷🇺
Stainless Steel Suspension TN-R 00 for Cable Trays, Dimensions 50x200mm to 50x400mm
сом. 13.08-65.40
SZ EMI OJSC 🇷🇺
Traversa profili doibai BSUT 85D, ba gabarit hajjati 220х125х150 mm, ba tholshina metalla 8,0 mm, stal nershavai marki A
сом. 98.10-327
SZ EMI OJSC 🇷🇺
Канал мустаҳкамшудаи нур KUS 000x00, бо андозаи умумӣ аз 50x50х3000 мм то 150x50х3000 мм, бо ғафсии металл аз 1,5 мм, г
сом. 98.10-392.40
SZ EMI OJSC 🇷🇺
Reinforcing Insert THP 000x00, Stainless Steel A, 40x500 to 200x500 mm
сом. 32.70-196.20
SZ EMI OJSC 🇷🇺
Traversa profili doib BSUS 10D, ba gabarit hajjati 190x270 mm, ba tholshina metalla 8,0 mm, stal nershavai markai AISI
сом. 163.50-523.20
SZ EMI OJSC 🇷🇺
Z-профили PMZ 30x40х30, бо габаритҳои андозаи 30x70х1000 мм то 30x70х3000 мм, бо ғафсии металл аз 2,0 мм то 3,0 мм, гарм
сом. 19.62-78.48
SZ EMI OJSC 🇷🇺
Профили П-образӣ PMU 32x20, бо андозаи умумӣ аз 32х20х1000 мм то 32х20х3000 мм, бо ғафсии металл аз 2,0 мм то 2,5 мм,
сом. 13.08-78.48
SZ EMI OJSC 🇷🇺
Рейкаи овезони сӯрохдори дугона SKDEР-000, бо андозаҳои аз 41x60х200 мм то 41x60х2000 мм, бо ғафсии металл
сом. 98.10-1,962
SZ EMI OJSC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.