Корпусҳои сипарӣ
Корпусҳои сипарии металлӣ
Қуттиҳои тақсимӣ
Кронштейнҳо
Қуттиҳои пластикӣ
Дастгоҳҳои воридотию тақсимотӣ
Қуттиҳои клеммӣ
Корпусҳои сипари ҳисобӣ
Лавозимоти сипарӣ
Қуттиҳои роҳ ва кабел
Шинопроводҳо
Изоляторҳо
Лавозимоти лоткҳо
Каналҳои кабелӣ
Корпусҳои хурдҳаҷм
Сарпӯши лоткҳо
Лоткҳои кабелии нардбонӣ
Лоткҳои кабелии рост
Лоткҳои кунҷӣ
Гардишҳои лоткҳо
Профилҳо ва ДИН-рейкаҳо
Дигар
Маҳсулот — Корпусҳо ва бастагуҳо
Wall-Mounted Distribution Boards with Solid Metal Door, Series ЩРН
сом. 163.50-654
Continent ETS LLC 🇷🇺
MKM11-N-36-54-Z TITAN 3 Корпуси металлӣ ЩРн-36 (540х330х120) IP54 IEK
сом. 163.50-523.20
IEK Holding LLC 🇷🇺
MKM11-N-24-54-Z TITAN 3 Корпуси металлӣ ЩРн-24 (410х330х120) IP54 IEK
сом. 163.50-523.20
IEK Holding LLC 🇷🇺
MKM14-N-24-31-Z-G Korpusi metalikī ЩРн-24з (395х310х120мм) IP31 GENERICA
сом. 98.10-327
IEK Holding LLC 🇷🇺
RS52 Series Linear Cabinet Enclosures from 1200mm to 2200mm High
сом. 2,289-19,620
Continent ETS LLC 🇷🇺
Wall-Mounted Combination Distribution Module (Power Outlet Panel) T P03.001
сом. 1,635-5,232
BLOCK OJSC 🇷🇺
MKM14-N-24-31-Z TITAN 3 Korpus metal. ShRN-24 (395x310x120) IP31 IEK
сом. 98.10-327
IEK Holding LLC 🇷🇺
MKM14-V-36-31-TW TITAN 3 Korpus metal. ShRV-36 (540x310x120) IP31 سفيد IEK
сом. 98.10-327
IEK Holding LLC 🇷🇺
Korpuс metallichiy 6520.096001.681
сом. 163.50-1,308
Federal State Unitary Enterprise "Production Association "OKTYABR" 🇷🇺
Control Panel Enclosure with Mounting Panel - ЩМП EKF PROxima
сом. 163.50-1,962
ELECTROSOLUTIONS LLC 🇷🇺
MKM14-N-72-31-Z TITAN 3 Корпуси металл. ЩРн-72 (540х600х120) IP31 IEK
сом. 228.90-654
IEK Holding LLC 🇷🇺
MKM15-V-12-31-ZU Korpush metalikii ShRv-12z-0 36 UHL3 IP31 PRO
сом. 163.50-523.20
IEK Holding LLC 🇷🇺
MKM12-V-48-31-Z-U Korpus metallichkiy ShRv-48z-1 36 IP31 "UNIVERSAL"
сом. 163.50-523.20
IEK Holding LLC 🇷🇺
Single-Sided Service Panels SHC-70 for 0.4 kV, 30(50) kA, 100-6300 A
сом. 9,810-39,240
SIBKOMPLEKT LLC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.