Маҳсулот — Резервуарҳои нақлиетӣ, зарфҳо ва бакҳои
Technological Storage Tank for Condensate Collection (Type T, Model Condensate Collector)
сом. 32,700-196,200
GAZPROM VNII GAZ LLC 🇷🇺
E-1334BX Liquid Propane Accumulator D1507-E 3600-013-00220575
сом. 98,100-392,400
KURGANHIMMASH LLC 🇷🇺
Intermediate Storage Tank for Liquids and Mixtures Model 350
сом. 9,810-32,700
Milk Technologies LLC 🇷🇺
Disposable Non-Sterile Polymer Container for Biological Samples - 120ml with Spoon
сом. 0.98-3.92
PLASTILAB INDUSTRY LLC 🇷🇺
Organic Waste Collection, Storage, Transport, and Disposal Container MK-02
сом. 13.08-65.40
KM-PROJECT LLC 🇷🇺
Waste Separation Container Module for Solid Waste Collection (KM-RS)
сом. 4,905-19,620
SA EKOTECH LLC 🇷🇺
Mobile Waste Container for Temporary Storage and Mechanical Loading Model 1100.B
сом. 1,635-4,578
TECHPOLYMER CJSC 🇷🇺
Mobile Waste Container for Collection and Temporary Storage, Art. 1100.B.KP
сом. 1,635-5,232
TECHPOLYMER CJSC 🇷🇺
Ash Accumulation Bunker for Efficient Storage - 00KPH60AK001_KD01
сом. 32,700-196,200
SVERDNIICHIMMASH OJSC 🇷🇺
Solid Waste Container with Lid 0.75 m³
сом. 981-3,270
Federal Penitentiary Service of Russia in Stavropol Krai Correctional Colony No. 3 🇷🇺
Emergency Liquid Storage Block E-2, INGR-2018.013.04.00.00.000
сом. 32,700-196,200
KURGANHIMMASH LLC 🇷🇺
Mobile Waste Container 660L Art. 25.C19.N (20.803.20.PE; 21.053.20.T)
сом. 1,635-4,578
AI-PLAST LLC 🇷🇺
Mobile Garbage Container 660L, Art. 25.C19.N (20.803.40.PE; 21.053.40.T)
сом. 1,635-5,232
AI-PLAST LLC 🇷🇺
Portable Trash Container 1100L Art. 22.C21 (20.800.70.PE; 21.050.70.PE)
сом. 1,635-4,578
AI-PLAST LLC 🇷🇺
Mobile Trash Container 120L Art. 23.C21 (20.801.70.PE; 21.051.70.T)
сом. 294.30-850.20
AI-PLAST LLC 🇷🇺
FAQ
•What information does a fabricator need to quote a custom tank?
Five things: stored medium and its temperature, working volume, orientation and installation type (underground, surface, elevated), site climate, and any internal equipment such as heating coils or mixers. With that, the plant proposes material, wall thickness and a general arrangement drawing, usually within a week, and a firm price tied to current steel cost.
•How are large tanks shipped if they exceed container dimensions?
Three routes are used. Vessels under roughly 3.2 metres diameter travel whole by truck or flat-rack. Larger tanks are fabricated in shell sections, shipped compactly, then welded on site — the plant supplies assembly drawings and can send a welding supervisor. Field-erected designs bolt or weld from panels for the biggest volumes.
•Are septic tanks and treatment plants sized for local regulations?
Suppliers size treatment equipment from your inflow data — population equivalent or daily volume and contamination levels — and guarantee outlet parameters in the contract. You then check those outlet figures against your national discharge norms. Plants regularly adjust process stages, adding tertiary treatment or disinfection, to meet stricter local limits.
•What corrosion protection is applied for underground installation?
Standard practice is abrasive blasting followed by reinforced bitumen-polymer or polyurethane external coating, with thickness measured and recorded. Internally, the lining matches the medium — from epoxy for fuels to food-grade coatings or bare stainless steel. Cathodic protection points can be welded in if your site plan uses them.
•How long does fabrication take from drawing approval?
Simple single-wall tanks up to 25 cubic metres typically take 3–5 weeks from approved drawings. Stainless process vessels, double-wall fuel tanks and packaged treatment plants run 6–10 weeks depending on complexity and internal equipment. Add transport: 1–2 weeks overland to Central Asia, 4–6 weeks by sea to the Gulf or Africa.