Маҳсулот — Металлопрокат
Cross Profile YKV-PP-800-800 for Mounting Air Circuit Breakers IEK
сом. 9.81-39.24
IEK Holding LLC 🇷🇺
Double Profile BSUP 5D-000, Size 50x100x200mm to 50x100x6000mm, Metal Thickness 2.0mm to 4.0mm
сом. 32.70-196.20
SZ EMI OJSC 🇷🇺
Double Profile BSUP 85D-000 Stainless Steel 85x64x200 to 85x64x6000 mm
сом. 98.10-327
SZ EMI OJSC 🇷🇺
Single Profile SMUP 41x21x00 with Dimensions 41x21x200 to 41x21x6000 mm
сом. 16.35-65.40
SZ EMI OJSC 🇷🇺
Premium Work Seat for Facade Operations - Promalp Lux V2, Code VST 243
сом. 981-3,270
VENTO-2M LLC 🇷🇺
Plastic Window Profile for Exterior and Interior Cladding 6241-03-5403112
сом. 16.35-58.86
AVTOPLAST LLC 🇷🇺
Metal Product Manufacturing Bridge FKU IK-4 GUFSIN Russia Irkutsk Region
сом. 3,270-26,160
FSIN IK-4 of the Irkutsk Region 🇷🇺
Welded Support TURN 120x120x4000mm (5mm) Zinc Primed RAL Mottled
сом. 981-3,270
TECHNOSERVICE LLC 🇷🇺
New Jersey Barrier Block 12DD/400-0.85 (0.81)
сом. 457.80-1,635
HASAVYURTOVSKY REINFORCED CONCRETE AND MK PLANT LLC 🇷🇺
Lightweight Manhole Cover for Inspection Wells
сом. 163.50-523.20
FSIN IK-9 of the Republic of Bashkortostan 🇷🇺
Pine Transformable Step Ladder 0.7M
сом. 98.10-327
FCU IK-7 UFSI of Russia in the Republic of Karelia 🇷🇺
50x50 mm 2 mm Wire Mesh for Fencing and Construction
сом. 16.35-65.40
FSIN IK-15 GUFSIN of Rostov Oblast 🇷🇺
HDZ STRUT Profile Support Plate for Mounting Systems CLM50D-POS-41-25-HDZ
сом. 3.27-19.62
IEK Holding LLC 🇷🇺
Load-Bearing Beam S80 (L150) for Shelving (Up to 4000mm) - Pack of 2500, Light Grey 7035 Finish
сом. 163.50-457.80
MEDVED LLC 🇷🇺
L-Shaped Connecting Plate for STRUT Profile EZ IEK CLM50D-PLS-150-40
сом. 3.27-19.62
IEK Holding LLC 🇷🇺
FAQ
•How do GOST steel grades correspond to EN and ASTM grades?
Published equivalence tables cover the common structural range: St3sp corresponds approximately to S235, 09G2S to S355 in many applications, and alloy grades have ASTM near-equivalents. Because matches are approximate, suppliers provide the chemical composition and mechanical properties from mill certificates so your engineer confirms suitability rather than relying on the name alone.
•What is the minimum tonnage worth shipping?
For commodity rolled product, 20 tonnes — one container or truck — is the practical floor per position, and vessel parcels of 500–3,000 tonnes get mill-direct pricing. Fabricated structures are different: a single bridge section or a set of galvanised columns can justify shipment because value per tonne is higher.
•Can plants fabricate structures to Eurocode or AISC project drawings?
Yes, fabrication shops work from your drawings regardless of the design code, since cutting, welding and drilling follow the geometry and weld specifications you provide. Welder certification and weld inspection protocols are issued per Russian standards; if your project requires specific NDT coverage or third-party inspection, write it into the contract.
•Is hot-dip galvanising available, and to what standard?
Most fabricators either operate or partner with galvanising lines running to GOST 9.307, which is harmonised with ISO 1461 in coating thickness requirements. Specify the design life or coating microns you need; typical structural coatings run 60–100 microns. Coating thickness measurement protocols ship with the goods.
•How is mixed steel cargo loaded — containers or breakbulk?
Bars, profiles and sheet up to 11.8 metres fit 40-foot containers; longer beams and large fabrications travel breakbulk or on flat-racks. Suppliers and forwarders decide per cargo list, balancing handling damage risk against freight cost. For Central Asia, open rail wagons are usually the cheapest route for long product.