Ապրանքներ — Մետաղական գլանվածք
Dust-Gas-Air Ducts GVP (PGVP) with Platforms and Ladders KVO, Including MMT and TDM
֏116,100-928,800
TRUD LLC 🇷🇺
Hot-Rolled Alloy Flat Steel Sheets, 600mm Width, Less than 4.75mm Thickness
֏185,760-580,500
PJSC SEVERSTAL 🇷🇺
Hot-Rolled Alloy Flat Steel Sheets, Width ≥600mm, Thickness 4.75-10mm
֏139,320-696,600
PJSC SEVERSTAL 🇷🇺
Hot-Rolled Non-Alloy Flat Steel Sheets, Width 600mm+, Thickness >4.75mm
֏116,100-696,600
PJSC SEVERSTAL 🇷🇺
Hot-Rolled Unalloyed Flat Steel Sheets, Width 600mm+, Thickness over 15mm
֏139,320-696,600
PJSC SEVERSTAL 🇷🇺
Hot-Rolled Alloy Flat Steel Sheets 600mm Width, Thickness Over 10mm
֏34,830-232,200
PJSC SEVERSTAL 🇷🇺
Hot-Rolled Plain Carbon Steel Sheets 600mm Width with Textured Finish
֏34,830-232,200
PJSC SEVERSTAL 🇷🇺
Hydraulic Excavator Threaded Overlay 12987534 Metal Structure
֏34,830-139,320
Liebherr-Nizhny Novgorod LLC 🇷🇺
Hot-Rolled Strip Steel for Corrosion and Heat Resistance
֏3,483-13,932
METALLURGICAL PLANT "PETROSTAL" OJSC 🇷🇺
Hot-Rolled Profile I-Beam for Railway Car Girders, Precision Engineered, Model No. 19
֏3,483-11,610
EVRAZ NTMK OJSC 🇷🇺
Equal Steel Angle for Structural Support in Construction - Grade 09Г2СД
֏232.20-928.80
EVRAZ NTMK OJSC 🇷🇺
Aluminum Plates for Construction and Manufacturing, GOST 17232-2023
֏2,322-46,440
ARKONIK SMZ OJSC 🇷🇺
Hot-Rolled Steel Unequal Angle 16/10 for Construction and Engineering
֏232.20-1,161
EVRAZ NTMK OJSC 🇷🇺
Long-Span Press-formed Aluminum Alloy Panels and Profiles TU 1-83-58-2002
֏2,322-23,220
ARKONIK SMZ OJSC 🇷🇺
Durable Metal Structures for Construction and Engineering Applications
֏11,610,000-232,200,000
NGM LLC 🇷🇺
Structural Rolled Sheet Metal with Corrugated Surface for Shipbuilding
֏232,200-2,322,000
ARKONIK SMZ OJSC 🇷🇺
Steel and Aluminum Structural Components for Industrial Greenhouses
֏1,161,000-23,220,000
AGRISO VG AZ LLC 🇷🇺
FAQ
•How do GOST steel grades correspond to EN and ASTM grades?
Published equivalence tables cover the common structural range: St3sp corresponds approximately to S235, 09G2S to S355 in many applications, and alloy grades have ASTM near-equivalents. Because matches are approximate, suppliers provide the chemical composition and mechanical properties from mill certificates so your engineer confirms suitability rather than relying on the name alone.
•What is the minimum tonnage worth shipping?
For commodity rolled product, 20 tonnes — one container or truck — is the practical floor per position, and vessel parcels of 500–3,000 tonnes get mill-direct pricing. Fabricated structures are different: a single bridge section or a set of galvanised columns can justify shipment because value per tonne is higher.
•Can plants fabricate structures to Eurocode or AISC project drawings?
Yes, fabrication shops work from your drawings regardless of the design code, since cutting, welding and drilling follow the geometry and weld specifications you provide. Welder certification and weld inspection protocols are issued per Russian standards; if your project requires specific NDT coverage or third-party inspection, write it into the contract.
•Is hot-dip galvanising available, and to what standard?
Most fabricators either operate or partner with galvanising lines running to GOST 9.307, which is harmonised with ISO 1461 in coating thickness requirements. Specify the design life or coating microns you need; typical structural coatings run 60–100 microns. Coating thickness measurement protocols ship with the goods.
•How is mixed steel cargo loaded — containers or breakbulk?
Bars, profiles and sheet up to 11.8 metres fit 40-foot containers; longer beams and large fabrications travel breakbulk or on flat-racks. Suppliers and forwarders decide per cargo list, balancing handling damage risk against freight cost. For Central Asia, open rail wagons are usually the cheapest route for long product.