Universal barrier for open display 900 narrow

The barrier consists of two side supports made of chipboard. Through holes with a diameter of 60 mm are provided in the two side supports with plugs. They are fastened to each other with a chipboard table top.

The table top is made by gluing two chipboard boards together with contact glue. Two perforated posts are mounted in the table top, connected at the bottom and top. Between the perforated posts a LDF panel is installed from above.

On the perforated posts hang brackets with LDPE shelves and stops on them. Mounting is done through a pre-made hole in the shelf. With the help of self-tapping screws, the edges of the shelf brackets are fixed.

Plinth made of LDPE faced with brushed stainless steel. The front and back panels are made of LDPE. The plinth and front panel are fixed to the side supports and table top by means of screws (screw 8) on PVA glue or equivalent eccentric screws.