Universal barrier 1400 C

Barrier consists of two side supports made of fibreboard. The operator's table top is made of LDPE. The upper side supports are attached to the worktop. They are made of laminated chipboard. The customer's table top is mounted on top made of LDPE. The worktop is made by gluing two chipboard boards together with contact glue. The upper and lower front panels are attached to other parts of the barrier. The lower front panel has a plinth lined with brushed stainless steel.
The parts are fastened to each other by means of screws (screw 8) on PVA glue or equivalent eccentric screws. Through holes 60 mm in diameter are provided in the two side (bottom) supports with plugs in the colour of the material.
The operator's table top has one 60 mm diameter through-hole for connecting office equipment. The hole has a plug in the colour of the material.
Edges for chipboard shall be made of PVC.