Pupil's table FrPU3r.1.3-5 (single-seat, adjustable. with adjustable angle of table top inclination)

The frame of the table consists of 2 supports made of flat-oval pipes with cross-section 45x25x1,5mm, 2 traverses-30x15x1,5mm and 2 lower legs with cross-section 40x20x1,5mm. The 45x25mm pipe has 4 holes for height adjustment and is fitted with an adapter sleeve for pipe to pipe fixing. A 30x15x1mm flat-oval tube is welded onto each top support.There are 2 height adjusters for tilting the lid. At the bottom of the table leg, on the outside of the bend welded support angle made of metal plate 107h13h1,5 mm. On each upper support, at the back is welded 2 plates 30x35x2mm with a through hole for further fastening of the kingdom. 2 hooks. All visible holes in the pipe are closed with plastic plugs. To the metal corner, on the outer side of the bend of the support leg of the table, attached plastic corner support 110h95h25mm., and on its front edge dressed plastic tip 65h45h25mm.The frame is powder-coated cover LDFP 22mm.The table frame LDFP 16mm