Multifunctional Measuring and Defect Inspection Machine Model B01.31

Available for Import

Multifunctional Measuring and Defect Inspection Machine B01.31 for Non-elastic and Slightly Elastic Materials

Textile Processing Equipment

Manufacturer: ROLLTEX LLC

Price: Request Quote

Bulk pricing available

FOB, CIF & EXW terms available

Email Inquiry

Description

The measuring table B01.31 is a multifunctional complex combining the functions of a 3 metre measuring table and a measuring and rejecting machine. The machine works with bales weighing up to 60kg and with a diameter of up to 400mm. It is available in bale widths from 1800 mm / up to 2000 mm / up to 2500 / up to 3200 mm / up to 3500 mm. The machine is equipped as standard with a roll edge levelling system, automatic material stretch tracking system, electronic programmable metre counter, forward and reverse stroke with twisting into a roll, viewing screen with LED illumination, roll end sensor, etc. The machine can be additionally equipped with a device for static removal, density adjustment of the coil winding, cutting manual or automatic knife, Astra software for accounting of uncoiled materials, weighing system of the coiled coil, adjustment of the width of the backlight, additional sensor tear.

Specifications

Mark

Rolltex

Maximum electrical power consumed by the machine

6 kW

Maximum bale diameter

400 mm

Maximum bale weight

60 kg

Electronic programmable counter for material length measurement

The electronic meter meter allows you to: use conversion factors that allow you to increase the accuracy of measuring materials of different densities and stretching; - non-volatile power supply of the meter ensures the preservation of the worked

Automatic material stretch tracking system

Stretch control function, allows rewinding and accurate metre measurement of slightly elastic materials.

Automatic bale edge equalization system

function ensures that the edge of the material roll is aligned to the base side (except for curled edge webs).

Total length of the table working surface

Total length of the table working surface - 3000 mm. screen with bottom illumination - 560 mm. blank surface (laminated chipboard) - 2440 mm.

Touch screen rotary operator panel

the machine is controlled from the operator's touch panel, which is designed in Russian.

Foot-operated rear and front foot controls

The foot pedal is necessary for easy filling of the machine. the rear pedal switches on the drives of the unwinding rollers. the front pedal is used for switching on and off the drives in the machine in case of defects or other technological reasons.

Rewinding scheme

from a cylindrical roll wound on a cardboard bobbin into a cylindrical roll wound on a cardboard bobbin with an outer diameter of at least 40 mm.

Reverse (Reverse)

The backstroke function is used for rewinding back the material in case of a missed/clarified defect or if the residual material has been rewound into a roll.

Machine stop sensor at the end of the bale

the bale end sensor is necessary to increase the measuring accuracy. upon opening the bale end sensor, the machine resets the rewind speed to 5 m/min and the operator finishes the rewind at a low rewind speed.

Additional unwinding axis for handling non-cylindrical bales on the cardboard bobbin inside

The axle is necessary for working with non-cylindrical bales on the bobbin. when using the "axle rewind" function, the machine automatically switches off the drive of the unwinding rollers in order to save energy consumption.

Overall dimensions (length x width), mm for machine with bale width up to 1800 mm

4050x2500

Mains power supply

220 V

Additional overhead lighting for the entire 3-meter work surface of the table

The optional overhead lighting allows specific types of defects such as variation in shade and non-colouring to be detected in reflected light on the material.

Ruler for visual measurement of fabric widths

required for visual measurement of bale width when machine is stopped.

3-meter longitudinal ruler

required for visual measurement of bale length when machine stops

Marker

The marker allows automatic chalk marking of the material according to a preset metre, e.g. after reaching 3.

Passport, operating and maintenance instructions

supplied with equipment

Note: All specifications are provided by the manufacturer and may be subject to change. Please contact us to confirm the latest specifications before placing your order.

Save Your Time

Share your requirements for a quick response!

Looking for

Quantity

Your mobile

Instant response in 15 minutes

Best wholesale prices guaranteed

Direct from manufacturer

Delivery & Payment

Shipping Terms

FOB Novorossiysk, Russia CIF Available to major ports worldwide EXW Manufacturer's facility, Russia

Delivery Time

Sea freight: 30-60 days (depending on destination) Air freight: 14-21 days (for urgent orders)

Payment Methods

Letter of Credit (L/C) Wire Transfer (T/T) Escrow Services

Categories

Language

Quick Links

Multifunctional Measuring and Defect Inspection Machine B01.31 for Non-elastic and Slightly Elastic Materials

Description

Specifications

Share your requirements for a quick response!