Manual Fire Alarm Detector Addressable VS-IPR-AP for Enhanced Safety

The detector is designed for manual (by pressing the button) formation of the signal "FIRE" and transmission of this signal to the device. After removing the pressing force, the detector remains in the switched-on state. The button is returned to its initial position using a special key. The button is located under a protective cover, which can be sealed. The detector is powered from the addressable line of the VS-VECTOR-AP system and operates under control of the VS-VECTOR-AP250 and VS-VECTOR-AP220 addressable devices. The detector has two built-in short-circuit isolators of the addressable line.