Directional rocker arm, article no. 520.740

Instrument for intramedullary osteosynthesis of the humerus. It is used for the insertion of intramedullary pins. Made of titanium alloy. U-shaped. For connection with the guide it has two pins with a diameter of 6 mm and length of 9 mm on one side, on the other side it has a cannulated sleeve with an outer diameter of 9.5 mm and an inner diameter of 6.2 mm under the screw-tie. For connection with a pin with a width of 3 mm and height of 1.9 mm at the end of the sleeve is a cylindrical half-ring with an outer diameter of 7.6 mm, height of 2.6 mm. Overall length 123 mm, height 86.5 mm, maximum width 35 mm. Laser marking of the article. Reusable.