Cross module KM42

The KM42 carrier module is designed to transmit user-defined signals (abbreviation - u.d.) on the VME64x bus from the slot where the K42V(W) processor module is installed to the neighbouring cross-board slots in which the M114 and KTM42 interface expansion modules are installed.
The KM42 module must be installed on the rear side of the VME64x cross-board in the P0 and P2 slots. The module shall be used in devices in conjunction with the K42V(W), M114 and KTM42 modules. The module shall function in a VME64x system bus crate in conjunction with the K42V(W) processor module and the M114 and KTM42 interface modules.
The module provides the following basic specifications:
- Number of backplane slots: 2, 3, or 4;
- Switching of high-speed serial signals
for interfaces: PCIE, SATA, 1Gb Ethernet, USB2.0;
- Switching of graphic interface signals: DVI, VGA.