Maximum value of measured vibration acceleration, RMS
200 m/s²
Operating frequency range of measured vibration acceleration (frequency response non-uniformity ± 10 %)
cut-off 2,3,5,10,30 Hz (user adjustable)
Maximum value of measured vibration velocity, RMS
200 mm/s
Maximum value of measured vibration displacement span, RMS
1000 μm
Input/output connectors
screw terminal blocks
Measurement error in the operating temperature range
±2 %
Types of connected vibration transducers
IEPE
Data exchange in the information system
RS485
Sensor supply voltage
IEPE 24 + 2 V
IEPE sensor supply current (±10 %)
5.7 mA
Consumption current (terminal blocks)
4 ... 20 mA
Supply Voltage (BNC)
± 5 V (signal)
Dry contacts: for monitoring the measured parameter
AL1, AL2, AL3
Step of setting the thresholds
0.1 (1) mm/s
Conditions of signalling (closed or open) of relay contacts "AL1", "AL2", "AL3"
Continuous exceeding of the informative signal of the set threshold value for 0-9 s
Mode of operation of relay contacts
blocking/self-recovery
Self-recovery condition
6% reduction in vibration from activation threshold
Delay of vibration control after establishing operation mode/self-recovery
0 or 20
Dry contact parameters
dry contact parameters <1 A
Differential synchronisation line
yes
Information displayed on the built-in display
measured parameter, sensor conversion coefficient, set threshold values, error codes for cable break and sensor failure, threshold exceed time setting, relay contact status
Consumption current
< 200 mA
Supply voltage (±10 %)
18...30 thousand m³
mass
200 million m² total area
Operating temperature range
-40...70 million m³
Step of setting the time of exceeding the vibration velocity threshold values
1