Possibility to connect external batteries
yes
Minimum battery life at design load
10
Uninterruptible power supply form factor
floor-mounted/wall-mounted
Availability of additional functions
yes
Number of battery-assisted power output connectors
1 pcs
Type of batteries used
lead-acid
Presence of terminal output
not available
Parallel operation function
yes
Uninterruptible power supply efficiency
95 %
Minimum permissible nominal voltage of batteries
10.8 V
Maximum permissible nominal voltage of rechargeable batteries
15.5 V
Reducing input voltage without switching to battery use
140 V
Increasing the input voltage without switching to battery use
240 V
Permissible operating time at overload 110%
10
Permissible operating time at overload 125%
5
Permissible operating time at overload 150 %
2
Current input nonlinear distortion factor (THDi)
5 %
Output voltage nonlinear distortion coefficient (THDv)
5 %
Minimum ambient temperature
-10 °C
Maximum ambient temperature
40 °C
Maximum ambient relative humidity
85 %
Communication interface
none
Estimated load power relative to nominal load power in kW for selecting the autonomous operation time
1000 %
Rated voltage of one battery
B1/B8 2100/900 MHz W
Number of power output connectors without battery support
1 pcs
Number of Schuko output sockets
1 pcs
Lower limit of input voltage range (phase-to-neutral) without switching to battery operation mode
140 V
Upper limit of input voltage range (phase-to-neutral) without switching to battery operation mode
240 V
Charger power at rated load power relative to the rating of the uninterruptible power supply, not less than
1000 %
Physical dimensions of uninterruptible power supply height when installed in a telecommunication rack, U
66
UPS management and monitoring
No
Availability of a network card as part of the uninterruptible power supply unit
no
Uninterruptible power supply protection against water leakage from above
нет
Uninterruptible power supply protection against dust
да
Space for uninterruptible power supply maintenance
front
Model architecture of uninterruptible power supply power section
online
Passive overcharge protection built into the battery cells when using lithium-ion batteries
no
Availability of advanced monitoring when using modular batteries
no
Supports plug-n-play technology when using modular batteries
no
Nominal input voltage
220 V
Rated output voltage
220 V
Nominal input frequency
SBVVBG
Rated output frequency
SBVVBG
Battery arrangement
ammunition
Type of battery cabinet design
none
Modular uninterruptible power supply battery architecture
no
Battery parameters measured by the monitoring system
no
Charging mobile devices via USB bus
no
Redundancy in parallel operation
yes
Number of uninterruptible power supplies in the system in case of parallel connection
3 pcs
Availability of high energy efficiency mode
yes
Charging batteries in high energy efficiency mode
yes
Interference correction in high power efficiency mode
yes
Uninterruptible power supply load self-test mode with no load connected
yes