Availability of additional functions
yes
Minimum battery life at design load
30
Possibility to connect external batteries
yes
Uninterruptible power supply form factor
2U
Number of battery-assisted power output connectors
2 pcs
Type of batteries used
various types
Presence of terminal output
available
Parallel operation function
no
Earthquake-proof design
yes
Uninterruptible power supply efficiency
85 %
Minimum permissible nominal voltage of batteries
10 V
Maximum permissible nominal voltage of rechargeable batteries
B1/B8 2100/900 MHz V
Reducing input voltage without switching to battery use
100 V
Increasing the input voltage without switching to battery use
264 V
Permissible operating time at overload 110%
15
Permissible operating time at overload 125%
10
Permissible operating time at overload 150 %
5
Current input nonlinear distortion factor (THDi)
0.9 %
Minimum ambient temperature
-20 °C
Maximum ambient temperature
60 °C
Maximum ambient relative humidity
95 %
Communication interface
SNMP
Estimated load power relative to nominal load power in kW for selecting the autonomous operation time
1800 %
Number of battery rooms
2 pcs
Height of one battery cabinet
170 mm
Width of one battery cabinet
450 mm
Depth of one battery cabinet
450 mm
Rated voltage of one battery
B1/B8 2100/900 MHz W
Number of batteries in one battery cabinet
4 pcs
Capacity of one battery
70
Number of power output connectors without battery support
4 pcs
Number of IEC 60320 C13 output sockets
1 pcs
Number of IEC 60320 C19 output sockets
1 pcs
Number of Schuko output sockets
1 pcs
Lower limit of input voltage range (phase-to-neutral) without switching to battery operation mode
100 V
Upper limit of input voltage range (phase-to-neutral) without switching to battery operation mode
264 V
Physical dimensions of uninterruptible power supply height when installed in a telecommunication rack, U
88.9
UPS management and monitoring
SNMP
Availability of a network card as part of the uninterruptible power supply unit
Yes
Uninterruptible power supply protection against water leakage from above
да
Uninterruptible power supply protection against dust
нет
Space for uninterruptible power supply maintenance
yes
Integrated N+1 redundancy (module level) for modular uninterruptible power supplies
no
Model architecture of uninterruptible power supply power section
electronic key
Passive overcharge protection built into the battery cells when using lithium-ion batteries
yes
Availability of advanced monitoring when using modular batteries
yes
Supports plug-n-play technology when using modular batteries
no
Uninterruptible power supply phase (input:output)
available
Input connection
standard
Output connection
standard
Nominal input voltage
220 V
Rated output voltage
48 V
Nominal input frequency
SBVVBG
Battery arrangement
horizontal
Type of battery cabinet design
2U
Modular uninterruptible power supply battery architecture
no
Battery parameters measured by the monitoring system
voltage
Charging mobile devices via USB bus
no
Redundancy in parallel operation
no
Number of uninterruptible power supplies in the system in case of parallel connection
2 pcs
Availability of high energy efficiency mode
yes
Charging batteries in high energy efficiency mode
yes
Interference correction in high power efficiency mode
available
Zero (0ms) switching time from high energy efficiency mode
available
Uninterruptible power supply load self-test mode with no load connected
yes
Power supply voltage
220 V
