محصولات — پارچههای تریکو
Melange Knitted Fabric (PE 52%, Cotton 48%) Single-Faced Fleece for Garments
﷼ 201,600-756,000
MIRTEX LLC 🇷🇺
Melange Knit Fabric (70% Cotton, 22% Polyester, 8% PU), Single-Faced Fleece
﷼ 176,400-630,000
MIRTEX LLC 🇷🇺
Mixed Melange Knit Fabric (Cotton 70%, Polyester 25%, PU 5%), Single-Faced Fleece
﷼ 176,400-630,000
MIRTEX LLC 🇷🇺
Melange Knit Fabric (75% Cotton, 25% Polyester), Single-Faced Fleece for Apparel
﷼ 75,600-403,200
MIRTEX LLC 🇷🇺
Melange Knit Fabric (PE-68%, Cotton-32%), Single-Faced Fleece for Apparel
﷼ 88,200-352,800
MIRTEX LLC 🇷🇺
Melange Knitted Fabric Mixed (PE-57%, CO-39%, PU-4%) Single-Faced Fleece
﷼ 75,600-302,400
MIRTEX LLC 🇷🇺
Single-Faced Mélange Knit Fabric (Cotton 50%, Polyester 50%) for Garments
﷼ 88,200-302,400
MIRTEX LLC 🇷🇺
Single-Faced Melange Fabric for Knitted Garments (Cotton 46%, Polyester 46%, PU 8%)
﷼ 151,200-630,000
MIRTEX LLC 🇷🇺
Melange Knitted Fabric (75% Cotton, 25% Polyester) Regular Pressed Fang Pattern
﷼ 63,000-252,000
MIRTEX LLC 🇷🇺
Melange Knitted Fabric Blend (Cotton 46%, Polyester 46%, PU 8%) for Garments
﷼ 75,600-403,200
MIRTEX LLC 🇷🇺
Melange Knit Fabric (50% Cotton, 50% Polyester) Regular Pressed Fango
﷼ 75,600-302,400
MIRTEX LLC 🇷🇺
Knitted Melange Fabric (50% Cotton, 50% Polyester) Plush Back Side for Clothing
﷼ 63,000-252,000
MIRTEX LLC 🇷🇺
Soft Plush Single-Sided Tricot Fabric for Knitwear (75% Cotton, 25% Polyester)
﷼ 126,000-756,000
MIRTEX LLC 🇷🇺
Elastic Mixed Knitted Fabric for Garments (70% Cotton, 25% Polyester, 5% Polyurethane) 2+2
﷼ 75,600-302,400
MIRTEX LLC 🇷🇺
Mixed Melange Jersey Fabric (Cotton 70%, Polyester 25%, PU 5%) for Clothing
﷼ 88,200-302,400
MIRTEX LLC 🇷🇺
Stretch Melange Knitted Fabric (Cotton 70%, Polyester 22%, PU 8%) 1+1
﷼ 88,200-352,800
MIRTEX LLC 🇷🇺
Melange Knit Fabric for Clothing (PE 47.5%, Cotton 47.5%, PU 5%), Elastic 1+1
﷼ 75,600-302,400
MIRTEX LLC 🇷🇺
Elastic Blend Melange Knitted Fabric (Cotton 46%, Polyester 46%, PU 8%)
﷼ 75,600-302,400
MIRTEX LLC 🇷🇺
Mixed Melange Knit Fabric (70% Cotton, 25% Polyester, 5% Polyurethane) for Garment Sewing
﷼ 88,200-352,800
MIRTEX LLC 🇷🇺
Melange Knitted Fabric for Garments (Cotton 47.5%, Polyester 47.5%, PU 5%)
﷼ 75,600-302,400
MIRTEX LLC 🇷🇺
FAQ
•What are typical roll parameters and how do I calculate shipping volume?
Knitted fabric usually ships in rolls of 15-25 kg, with open width around 180 cm or tubular widths of 90-100 cm depending on the article. Mills state weight per linear meter, so tonnage converts directly to meters. A 20-foot container carries roughly 9-12 tons of rolled knits; your supplier will provide exact packing data for the loading plan.
•Can the mill dye fabric to my Pantone shades?
Yes, dye-to-order is standard. You send a Pantone reference or physical swatch, the mill produces a lab dip for approval, then dyes the batch. Minimums per shade typically run 200-500 kg. Approve lab dips under the light source your market uses, and keep an approved swatch on file for repeat orders.
•How do you handle shrinkage - my garments must hold their size after washing?
Ask whether the article is compacted or otherwise pre-shrunk, and request the declared residual shrinkage figures, which mills measure under GOST methods. Cotton knits without compacting can shrink noticeably, so factories either order compacted fabric or build shrinkage allowance into patterns. Test a sample roll through your own wash protocol before committing to volume.
•What is the minimum order for a first trial?
Stock-service mills sell trial quantities from one roll per article and color, around 20-25 kg. Production-to-order typically starts at 200-300 kg per color. A practical first step is a mixed trial order of several articles in stock shades to test sewing behavior, followed by a dyed-to-order program once specifications are settled.
•Are these knits suitable for childrenswear regulations in my country?
Cotton-rich knits in this section are produced largely for the children's segment and carry EAC conformity documentation under EAEU technical regulations covering products for children where applicable. For your own market, request the fiber composition and dye information from the mill and run any locally required tests on production samples - mills are accustomed to such requests.