محصولات — مواد غیربافته
Non-Woven Thermal Bonded Technical Upholstery Fabric Periotek® Hollo
﷼ 37,800-151,200
FNM "VES MIR" LLC 🇷🇺
Thermally Bonded Non-Woven Fabric Thermoloft® Lux (Density up to 150g/m²)
﷼ 25,200-151,200
FNM "VES MIR" LLC 🇷🇺
Thermally Bonded Non-Woven Fabric Thermoloft® Lite (Max 150 g/m2 Density)
﷼ 37,800-151,200
FNM "VES MIR" LLC 🇷🇺
Shelter® B Comfort Multi-layer Non-woven Fabric for Footwear Insulation
﷼ 37,800-151,200
FNM "VES MIR" LLC 🇷🇺
Shelter® B Non-Woven Multi-Layer Fabric for Footwear Insulation
﷼ 37,800-151,200
FNM "VES MIR" LLC 🇷🇺
Shelter® B Non-Woven Multi-Layer Fabric TМP2 for Footwear Insulation
﷼ 37,800-151,200
FNM "VES MIR" LLC 🇷🇺
Shelter® Profi ST Non-Woven Thermal Bonded Fabric (Density < 150 g/m²)
﷼ 25,200-151,200
FNM "VES MIR" LLC 🇷🇺
Shelter® Optimum Non-Woven Thermally Bonded Fabric (density <150 g/m²)
﷼ 12,600-75,600
FNM "VES MIR" LLC 🇷🇺
Shelter® Micro Non-Woven Thermally Bonded Fabric (Min 150 g/m2)
﷼ 25,200-151,200
FNM "VES MIR" LLC 🇷🇺
Hollowfiber Volumetric Non-Woven Fabric for Upholstery and Construction
﷼ 37,800-504,000
TERMOPOL TD LLC 🇷🇺
Non-woven Thermal Bonded Fabric with Antistatic Properties "Hollofiber SOFT
﷼ 37,800-504,000
TERMOPOL TD LLC 🇷🇺
Non-woven Thermal Bonded Fabric with Antistatic Properties "ARKVINTER
﷼ 50,400-756,000
TERMOPOL TD LLC 🇷🇺
FAQ
•What densities of spunbond are available and how do I choose?
Producers run the typical range from 15-17 g/m2 for light crop covers up to 100-150 g/m2 for packaging and furniture applications. Choose by function: lightweight grades for frost protection and row covers, 40-60 g/m2 for bags and disposable products, heavier grades for upholstery backing. State your application and the producer will recommend a grade and send rolls for trial.
•Is agricultural spunbond stabilized against sunlight?
Agro grades are normally UV-stabilized for one or more growing seasons, and the producer declares the stabilization level. For high-radiation climates in the Gulf or Africa, ask specifically for the seasonal lifetime under your conditions rather than relying on the standard rating, and consider the heavier-stabilized grades. Field behavior should be confirmed with a trial batch.
•How is wadding shipped without paying for air?
Thermal wadding and sintepon are compressed into bales or vacuum-packed rolls, which cuts shipped volume several-fold; the material recovers its loft after unpacking. Confirm the compression ratio and recovered thickness with the producer, since this determines how many tons fit a container. Loading plans and bale dimensions are provided with the quotation.
•Can geotextile from this section be used in road projects with engineering supervision?
Yes, producers supply needle-punched geotextile with declared tensile strength, elongation and density measured under Russian standards, and provide test reports with each batch. If your project engineer specifies parameters under ISO or ASTM methods, request the producer's comparative data or arrange third-party testing of delivery samples - both are routine for export contracts.
•What are realistic minimums and lead times for a first order?
Producers typically sell from about one ton per article for stocked grades; custom widths or colors start around 3-5 tons. Production lead time is short, usually 10-20 days, because lines run continuously. Transit adds 10-18 days overland to Central Asia or 30-45 days by sea to most other regions.