محصولات — یراق و قطعات مبلمان
Modular Wall Facade Set for Hanging Section (White) - Model LD.522130.000
﷼ 1,512,000-5,040,000
ALMAZ LLC 🇷🇺
Kitchen Cabinet Facade Set with 3 Drawers, Model Marina LD.273170.000
﷼ 630,000-2,016,000
ALMAZ LLC 🇷🇺
Country LD 245190.000 Cabinet Top Panel Above Extractor (Light Ash)
﷼ 378,000-1,512,000
ALMAZ LLC 🇷🇺
Kitchen Cabinet Facade 1000 Left (White Gloss/Black) - Sherwood LD.281190.000
﷼ 630,000-2,016,000
ALMAZ LLC 🇷🇺
Decorative Facade Door 600 Type 1 (Alabaster) - Marina LD.273050.000
﷼ 378,000-1,512,000
ALMAZ LLC 🇷🇺
Country LD 245090.000 Door 500 (Panel Set) (Sonoma Light/Sonoma Green)
﷼ 630,000-2,016,000
ALMAZ LLC 🇷🇺
Solid Left Cabinet Door for Louisa Wardrobe, Model LD.665350.000 (Alabaster)
﷼ 3,780,000-12,600,000
ALMAZ LLC 🇷🇺
Tinted Glass Door A-321.C - 4mm Thickness with Plastic Handle
﷼ 630,000-2,016,000
Kuznetsky Furniture Combine LLC 🇷🇺
Brook 80 Tabletop (60+20) for Furniture - Aquaton Model 1A204205BC010
﷼ 1,764,000-6,300,000
AQUATON RUS LLC 🇷🇺
Kitchen Cabinet End Panel - Mokka LD.274900.000, 722mm (Anthracite Textured Oak)
﷼ 378,000-1,260,000
ALMAZ LLC 🇷🇺
Glass Doors in Aluminum Frame KZF-38RS (Set of 2)
﷼ 3,780,000-12,600,000
Kuznetsky Furniture Combine LLC 🇷🇺
PE 01 Partition for Residential and Commercial Spaces
﷼ 630,000-7,560,000
IP Andreev Dmitry Ivanovich 🇷🇺
Kashmir Kitchen Cabinet Door Set with Oven 600 - Model LD.274270.000
﷼ 2,520,000-7,560,000
ALMAZ LLC 🇷🇺
FAQ
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.