محفظه تابلو روکار و توکار
تابلو برق فلزی
جعبه تقسیم
براکت و بست
تابلو پلاستیکی
تابلوهای ورودی و توزیع اصلی
جعبه ترمینال
تابلو کنتور و طبقه
لوازم تابلو
جعبههای مسیر و توزیع
شینه پیشساخته
مقره و یراق نگهدارنده
لوازم سینی کابل
سازماندهنده و داکت کابل
محفظههای کوچک
درپوش سینی کابل
سینی کابل نردبانی
سینی کابل مستقیم
سینی کابل گوشه
زانوی سینی کابل
پروفیل و ریل DIN
سایر
محصولات — محفظه و قاببندی
MKP82-N-24-WD-41-10 جعبه ЩРН-П-24 ماژول پلاستیکی IP41 PRIME درب سفید
﷼ 378,000-1,260,000
IEK Holding LLC 🇷🇺
MKP82-N-18-WD-41-10 جعبه ЩРН-П-18 ماژولهای پلاستیکی آویزان IP41 PRIME درب سفید
﷼ 378,000-1,260,000
IEK Holding LLC 🇷🇺
گیره SKP 000x00، ابعاد 50x50 میلیمتر، 60x40 میلیمتر، ضخامت 1.5 میلیمتر، فولاد ضد زنگ AISI 316L
﷼ 12,600-75,600
SZ EMI OJSC 🇷🇺
کنسول UBF 000، ابعاد 100x130 میلیمتر تا 120x680 میلیمتر، ضخامت 2.5 میلیمتر، گالوانیزه حرارتی
﷼ 50,400-252,000
SZ EMI OJSC 🇷🇺
صفحه زاویه ای 90 درجه 2 سوراخ SMA 621، با ابعاد 40x48x50 میلی متر، با ضخامت فلز 5.0 میلی متر، فولاد ضد زنگ
﷼ 63,000-252,000
SZ EMI OJSC 🇷🇺
صفحه ۲ سوراخ SMA 603، با ابعاد ۴۰x۸۰ میلیمتر، با ضخامت فلز ۵.۰ میلیمتر، فولاد ضد زنگ نوع AISI 316L
﷼ 63,000-252,000
SZ EMI OJSC 🇷🇺
پایه نگهدارنده BSO 50-000، با ابعاد از 110x50x130 میلیمتر تا 200x50x1030 میلیمتر، با ضخامت فلز کنسول 2.5 میلیمتر، گور
﷼ 126,000-1,260,000
SZ EMI OJSC 🇷🇺
Single Brace for Consoles SM-U 00, 40x300 to 40x500 mm, 3 mm Thick, Hot-Dip Galvanized
﷼ 126,000-756,000
SZ EMI OJSC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.