محفظه تابلو روکار و توکار
تابلو برق فلزی
جعبه تقسیم
براکت و بست
تابلو پلاستیکی
تابلوهای ورودی و توزیع اصلی
جعبه ترمینال
تابلو کنتور و طبقه
لوازم تابلو
جعبههای مسیر و توزیع
شینه پیشساخته
مقره و یراق نگهدارنده
لوازم سینی کابل
سازماندهنده و داکت کابل
محفظههای کوچک
درپوش سینی کابل
سینی کابل نردبانی
سینی کابل مستقیم
سینی کابل گوشه
زانوی سینی کابل
پروفیل و ریل DIN
سایر
محصولات — محفظه و قاببندی
Path Junction Box PЯ-ГП-1 for 9 Two-Contact Terminals 25003-00-00
﷼ 630,000-2,016,000
ELTEZA OJSC 🇷🇺
MTT21-036-0250 جعبه با ترانسفورماتور کاهنده یاتپ-0,25 400/36-3 36 UHL4 IP30 IEK
﷼ 630,000-2,016,000
IEK Holding LLC 🇷🇺
جعبه توزیع با کلید اتوماتیک و ترمینال برای جریان های تا 100 آمپر YVSH2-C-100
﷼ 3,780,000-12,600,000
CHEAZ OJSC 🇷🇺
MTT12-012-0250 جعبه با ترانسفورماتور کاهنده یاتپ-0,25 230/12-2 36 UHL4 IP30 IEK
﷼ 882,000-2,520,000
IEK Holding LLC 🇷🇺
جعبه راهی ПЯ-ГПШК-I (برای 6 ترمینال دوکانتاکت، بلوک برای 20 ترمینال ریل، بدون پل) 25003-00-00-12
﷼ 630,000-2,016,000
ELTEZA OJSC 🇷🇺
Intermediate Mounting Panel MP 200.11 for Floor Distribution Cabinets
﷼ 126,000-756,000
PROVENTO LLC 🇷🇺
پنل تهویه FM05-11ME ITK 1 ماژول C14 برای کمد 10" LINEA WS مشکی
﷼ 378,000-1,260,000
IEK Holding LLC 🇷🇺
YKV-RB-450 ریل جانبی برای VRU ХХХХхХХХх450 SMART (مجموعه ۲ عددی)
﷼ 37,800-151,200
IEK Holding LLC 🇷🇺
درپوش پایه تأمین برق SPPKL، با ابعاد 900x12 میلیمتر، با ضخامت فلز 1.2 میلیمتر، فولاد، گالوانیزه گرم
﷼ 126,000-756,000
SZ EMI OJSC 🇷🇺
YKV-BPP-800-S ترابرس برای تابلو برق ХХХХхХХХх800 SMART (2عدد/مجموعه) IEK
﷼ 50,400-252,000
IEK Holding LLC 🇷🇺
LWE5-09U-600-MW ITK دیواره پشتی برای کمد WE 9U با عرض 600mm مشکی
﷼ 126,000-756,000
IEK Holding LLC 🇷🇺
LWE5-12U-600-MW ITK دیوار پشتی برای کمد WE 12U با عرض 600 میلیمتر مشکی
﷼ 126,000-756,000
IEK Holding LLC 🇷🇺
درپوش پایه تغذیه SPPKL، با ابعاد 900x12 میلیمتر، با ضخامت فلز 1.2 میلیمتر، فولاد ضد زنگ از نوع AISI
﷼ 378,000-1,512,000
SZ EMI OJSC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.