1

Soʻrov tafsilotlari

2

Aloqa maʼlumotlari

Sizga nima kerak?

Qidirayotgan mahsulot yoki xizmatni tasvirlab bering

Mahsulot tavsifi *

Miqdori *

Birlik

Sizning aloqa maʼlumotlaringiz

Tez orada siz bilan bogʻlanamiz

Toʻliq ism *

Email *

Telefon raqami *

✓

Soʻrov yuborildi!

Rahmat! Tez orada eng yaxshi takliflar bilan siz bilan bogʻlanamiz.

GAKS-I-3-10/300S Test Stand for Pneumatic and Hydraulic Testing

GAKS-I-3-10/300S Test Stand for Pneumatic and Hydraulic Testing — REMARM LLC

Brend: ГАКС

so'm 52,920,000 - so'm 189,000,000 UZS

MOQ: 1 pieces

Asosiy xususiyatlar

Overall dimensions of the stand, mm: 940x760x930 mm mm

Maximum setting pressure Rn, MPa: 20.0 (up to DN100); 16.0 (up to DN150); 9.6 (up to DN200); 6.3 (up to DN250); 4.0 (up to DN350); 2.5 (up to DN400)

Maximum clamping force, tonnes: SBVVBG

Application range by DN: 10...300 (up to 400) mm

Yetkazib beruvchi haqida ma'lumot

REMARM LLC

🇷🇺 📦 🏭 🛡️

Barcha mahsulotlarni ko'rish (66)

Tezkor so'rov

Tavsif

The test bench GAKS-I-3-10/300S is designed for pneumatic and hydraulic tests during adjustment (taring) of safety valves, for pneumatic tests on tightness of the gate of the adjusted valve and connection "body-saddle". Adjustment of valves on the stand is made by compressed air.

The compressed air pressure is supplied and regulated to the bench from the pneumatic control panel. Gate tightness tests are carried out with high-pressure compressed air and technical water.

Management and control of hydraulic tests, sealing of the valve by hydraulic clamping drive are carried out from the control panel of the pumping station. Measurement accuracy, logging of test results is achieved by using the electronic device "SEITRONIC PG10-1" or automated electronic system "SEITRONIC SIR-PG".

The set of replaceable quick-installable plugs is determined by the nomenclature of the tested products.

Xususiyatlar

Overall dimensions of the stand, mm

940x760x930 mm mm

Maximum setting pressure Rn, MPa

20.0 (up to DN100); 16.0 (up to DN150); 9.6 (up to DN200); 6.3 (up to DN250); 4.0 (up to DN350); 2.5 (up to DN400)

Maximum clamping force, tonnes

SBVVBG

Application range by DN

10...300 (up to 400) mm

Sealing of the valve under test

with hydraulic drive

Diameter of clamped flange, min/max, t

SBVVBG

Control methods used for pneumatic and hydraulic tests during valve setting

manometric (by the drop in pressure in the valve inlet pipe) and acoustic (sharp pop when opening the adjusted valve at the set pressure)

Control methods used for testing the tightness of the gate and body-to-seat connection

visual (by the presence/absence of air bubbles on the water surface in the outlet pipe)

Stand weight, kg

551 kg

O'xshash mahsulotlar

Spring Testing Stands for Safety Valve Type GAKS-IP

Spring Testing Stands for Safety Valve Type GAKS-IP

so'm 113,400,000-so'm 378,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

GAKS-I-3 Test Stands for Pneumatic and Hydraulic Testing

GAKS-I-3 Test Stands for Pneumatic and Hydraulic Testing

so'm 113,400,000-so'm 453,600,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

Hydraulic Testing Stand for Turbofan Engine Components

Hydraulic Testing Stand for Turbofan Engine Components

so'm 1,134,000,000-so'm 4,536,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

OJSC "NPP "TEMP" IM. F. KOROTKOVA" 🇷🇺

Gas Cylinder Inspection Complex PKTBA-KTOB

Gas Cylinder Inspection Complex PKTBA-KTOB

so'm 1,134,000,000-so'm 4,536,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

PKTBA CJSC 🇷🇺

Hydraulic Cylinder Testing Stand - Model HCT-2023

Hydraulic Cylinder Testing Stand - Model HCT-2023

so'm 22,680,000-so'm 75,600,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

IRMAS LLC 🇷🇺

Hydraulic and Pneumatic Testing Stand for Pipeline Valves BIT-10/400-50

Hydraulic and Pneumatic Testing Stand for Pipeline Valves BIT-10/400-50

so'm 113,400,000-so'm 378,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

BIT "STANCOINZH" LLC 🇷🇺

Pneumatic Testing Stand for Gas Cylinders with GAKS-KOB-SP Fittings

Pneumatic Testing Stand for Gas Cylinders with GAKS-KOB-SP Fittings

so'm 22,680,000-so'm 90,720,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

Hydraulic Testing Stand for Strength, Mass, and Capacity of Gas Cylinders GAKS-KOB-SG

Hydraulic Testing Stand for Strength, Mass, and Capacity of Gas Cylinders GAKS-KOB-SG

so'm 60,480,000-so'm 189,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

Testing Stands for Wellhead and Blowout Prevention Equipment PKTBA-CI-PVO (CI-PVO)

Testing Stands for Wellhead and Blowout Prevention Equipment PKTBA-CI-PVO (CI-PVO)

so'm 189,000,000-so'm 756,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

PKTBA CJSC 🇷🇺

Pneumatic and Hydraulic Testing Stands GAKS-I

Pneumatic and Hydraulic Testing Stands GAKS-I

so'm 60,480,000-so'm 378,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

GAKS-I-3 Test Complex for Safety Valve Calibration

GAKS-I-3 Test Complex for Safety Valve Calibration

so'm 37,800,000-so'm 226,800,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

Hydraulic Testing Stand for Heat Exchangers

Hydraulic Testing Stand for Heat Exchangers

so'm 113,400,000-so'm 453,600,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

CTSS OJSC 🇷🇺

Pneumatic and Hydraulic Testing Stands with Power Units PKTBA-SI (SI) and PKTBA-PGS (PGS)

Pneumatic and Hydraulic Testing Stands with Power Units PKTBA-SI (SI) and PKTBA-PGS (PGS)

so'm 189,000,000-so'm 604,800,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

PKTBA CJSC 🇷🇺

GAKS-I:D Testing Complex for Pipeline Valve Strength and Leak Testing

GAKS-I:D Testing Complex for Pipeline Valve Strength and Leak Testing

so'm 189,000,000-so'm 1,512,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

GAKS-I-7-11 Type Face Seal Testing Stands

GAKS-I-7-11 Type Face Seal Testing Stands

so'm 113,400,000-so'm 378,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

Hydraulic and Pneumatic Testing Post for Wellhead and Blowout Equipment DN 50-280 mm PKTBA-P-1

Hydraulic and Pneumatic Testing Post for Wellhead and Blowout Equipment DN 50-280 mm PKTBA-P-1

so'm 189,000,000-so'm 604,800,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

PKTBA CJSC 🇷🇺

Hydrostatic Testing Equipment for Pressure Tests (AGI)

Hydrostatic Testing Equipment for Pressure Tests (AGI)

so'm 529,200,000-so'm 2,268,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

AKO BARSS LLC 🇷🇺

Pneumatic-Hydraulic Testing Stands PKTBA-S with PKTBA-PGS Units

Pneumatic-Hydraulic Testing Stands PKTBA-S with PKTBA-PGS Units

so'm 529,200,000-so'm 1,890,000,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

PKTBA CJSC 🇷🇺

Hydraulic Testing Stand for Strength and Volumetric Deformation GAKS-KOB-SGOR

Hydraulic Testing Stand for Strength and Volumetric Deformation GAKS-KOB-SGOR

so'm 22,680,000-so'm 90,720,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

REMARM LLC 🇷🇺

Spring Testing Stand for Safety Valve Springs (Model IP)

Spring Testing Stand for Safety Valve Springs (Model IP)

so'm 18,900,000-so'm 75,600,000 UZS

Sanoat uskunalari

Rossiyadan toʻgʻridan-toʻgʻri zavoddan

TECHNOKOM LLC 🇷🇺