Mahsulotlar — Furnitura va aksessuarlar
Oliver LD.524190.000 Shelf Facade 900 (Set) (Golden Oak/White)
so'm 1,134,000-3,780,000
ALMAZ LLC 🇷🇺
Plywood Tabletop 15mm for Various Applications TV-DSTL-6.14.01
so'm 113,400-378,000
MEBELPROM LLC 🇷🇺
VELAR SPEECH Decorative Conference Table Insert Section 140 VL 433
so'm 2,268,000-9,072,000
MK STR LLC 🇷🇺
Country LD 245770.000 Kitchen Cabinet Facade Set with 3 Drawers Lux (Sonoma Light/Sono)
so'm 264,600-756,000
ALMAZ LLC 🇷🇺
Country LD 245280.000 Door 600 for Cabinet Above Extractor (Panel)
so'm 189,000-604,800
ALMAZ LLC 🇷🇺
Kitchen Cabinet End Panel (White Gloss/Black) - Sherwood LD.281900.000
so'm 113,400-378,000
ALMAZ LLC 🇷🇺
GENESIS Hi-Tech Executive Desk with Support Pedestal, Art. JNS802
so'm 1,134,000-3,780,000
MODER OM LLC 🇷🇺
Sherwood Kitchen Cabinet Facade 600 with 2 Drawers Lux (4) (Golden Oak/Black)
so'm 189,000-604,800
ALMAZ LLC 🇷🇺
Kitchen Cabinet Door Panel with Glass Finish 722mm - Mokka LD.274760.000
so'm 113,400-378,000
ALMAZ LLC 🇷🇺
Country LD 245070.000 Facade 400 Three Drawers (Noce Tavolato Classic)
so'm 378,000-1,209,600
ALMAZ LLC 🇷🇺
Mokka LD.274940.000 Cabinet End Panel for Dishes (Textured Anthracite Oak)
so'm 113,400-453,600
ALMAZ LLC 🇷🇺
Marina LD.273170.000 Kitchen Base Cabinet Facade Set with 3 Drawers (300) - White Textured Oak
so'm 264,600-756,000
ALMAZ LLC 🇷🇺
White Anastasia Type 3 831 Facade with Straight Milling and Design, Handle Included
so'm 189,000-604,800
ALMAZ LLC 🇷🇺
Mokka LD.274240.000 Cupboard Door Set for 600mm Kitchen Unit Type 2 Without Oven (Sandown)
so'm 529,200-1,890,000
ALMAZ LLC 🇷🇺
Anastasia Type 3 808 Facade with Direct Milling and Handle Included
so'm 264,600-756,000
ALMAZ LLC 🇷🇺
FAQ
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.