Shchit korpuslari
Metall shchit korpuslari
Taqsimlash va ulash qutilari
Kronshteynlar
Plastik bokslar
Kiritish-taqsimlash qurilmalari
Klemma qutilari
Hisob va qavat shchit korpuslari
Shchit aksessuarlari
Yo'l, kabel va taqsimlash qutilari
Shinaprovodlar
Izolyatorlar
Lotok aksessuarlari
Kabel kanallari
Kichik korpuslar KM/KMT
Lotok qopqoqlari
Narvonsimon kabel lotoklari
Tekis kabel lotoklari
Burchakli kabel lotoklari
Lotok burilishlari
Profillar va DIN reykalari
Boshqa
Mahsulotlar — Korpuslar va o'rnatish
Polymer Insulator OCK 10-110-B05-2 UHL1 for Electrical Equipment
so'm 1,134,000-3,780,000
ENERGIYA + 21 OJSC 🇷🇺
Izolyator fiksatorli sterjenli kremniyorganik rezina FSPKr 120-3/0,6
so'm 113,400-453,600
INSTA LLC 🇷🇺
Insulator LK 120/35-2GP for High Voltage Applications
so'm 1,134,000-3,780,000
ENERGIYA + 21 OJSC 🇷🇺
Suspended Linear Insulator with Silicone Composite Coating LK 160/110-I-4 GP
so'm 1,134,000-3,780,000
INSTA LLC 🇷🇺
Silicon Rubber Insulator for Tension Rod NSPKr 120-3/0.8-0.6-NV-GU
so'm 113,400-453,600
INSTA LLC 🇷🇺
Insulator Support Rod with Silicone Composite Coating OSC 3-35-A-2
so'm 113,400-453,600
INSTA LLC 🇷🇺
Izolyator fiksatorli sterjnevoy kremniyorganik rezina FSPKr 70-25/1,1-D-R
so'm 113,400-453,600
INSTA LLC 🇷🇺
Porcelain Insulator with Protective Silicone Composite OSC 4-10-A-2
so'm 113,400-453,600
INSTA LLC 🇷🇺
Linear Suspension Insulator with Silicon Organic Coating LK 70/10-I-4 GP
so'm 113,400-378,000
INSTA LLC 🇷🇺
Insulator for Suspension Line with Protective Silicone Shell LK 160/330-I-2 GP
so'm 1,134,000-3,780,000
INSTA LLC 🇷🇺
Insulating Fixed Rod Insulator with Ribbed Silicone Rubber Shell FSPKr 160-25/1.5I
so'm 113,400-453,600
INSTA LLC 🇷🇺
Polymer Insulators for Busbar Holders, Types 100-10-4, 87-5-4, 87-10-3, 75-5-4, 75-10-2, 50-5-2, 50-10-1
so'm 15,120-75,600
METALLURG LLC 🇷🇺
Insulating Support Insulator with Silicone Composite Shell OSK 12.5-35-A-2
so'm 113,400-453,600
INSTA LLC 🇷🇺
Insulating Support Insulator with Protective Shell OCK 4-20-A-2
so'm 1,134,000-3,780,000
INSTA LLC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.