Товары — Фурнитура и комплектующие
Маркиза ЛД.517230.000 Сиденье банкетки 700 (ткань Шампань 1002, исполнение 2 )
₽15 000-25 000
ООО "АЛМАЗ" 🇷🇺
Шервуд ЛД.281720.000 Фасад шкафа кухонного высокого (комплект) (Белый глянец )
₽2 500-4 000
ООО "АЛМАЗ" 🇷🇺
Дверца большая дерев. правая 489*19*1421 (петли справа), арт. MND-1421W R
₽15 000-25 000
ООО "МОДЕР ОМ" 🇷🇺
Марина ЛД.273230.000 Фасад комплект дверей шкаф для посуды 600 Тип 2 с духовкой (Алебастр )
₽10 000-15 000
ООО "АЛМАЗ" 🇷🇺
Эссен ЛД.681040.000 Полка навесная 1300 (Серый шифер/Дуб Галифакс табак )
₽1 500-2 500
ООО "АЛМАЗ" 🇷🇺
Мокка ЛД.274990.000 Фасад панель окончание шкафа кухонного 970 мм (Кашмир )
₽1 500-2 500
ООО "АЛМАЗ" 🇷🇺
Амели ЛД.251690.000 Фасад комплект дверей пенала высокого правого с духовкой
₽15 000-25 000
ООО "АЛМАЗ" 🇷🇺
Индиго ЛД.298850.000 Фасад комплект для тумбы кухонной 800 с 3 ящиками ЛЮКС (4) (Тёмно-синий)
₽7 000-12 000
ООО "АЛМАЗ" 🇷🇺
Мокка ЛД.274160.000 Фасад комплект для тумбы кухонной 800 с 3 ящиками (4) (Сандаун )
₽3 000-5 000
ООО "АЛМАЗ" 🇷🇺
Столешница Лофт Фабрик 80 дуб кантри 1A243003LTDY0 Aquaton1.A243.0.03L.TDY.0
₽4 500-7 000
ООО "АКВАТОН РУС" 🇷🇺
Кантри ЛД 245287.000 дверь 600 шкафа над вытяжкой (филенка фрезерованная)
₽2 500-4 000
ООО "АЛМАЗ" 🇷🇺
Дверь глухая одностворчатая линейных шкафов серии RS52 высотой от 1200 мм. до 2200 мм., шириной от 600мм. до 800.
₽3 000-8 000
ООО "Континент ЭТС" 🇷🇺
Шервуд ЛД.281130.000 Фасад тумбы кухонной 600 с 3 ящиками ЛЮКС (4) (Дуб золотой/Чёрный )
₽3 500-5 000
ООО "АЛМАЗ" 🇷🇺
Шервуд ЛД.281400.000 Фасад шкафа горизонтального 800 со стеклом (комплект) (Белый глянец/Алюминий )
₽2 500-4 000
ООО "АЛМАЗ" 🇷🇺
Кантри ЛД 245740.000 Фасад комплект для тумбы кухонной 400 с 3 ящиками ЛЮКС
₽3 500-5 500
ООО "АЛМАЗ" 🇷🇺
Марина ЛД.273200.000 Фасад комплект для тумбы кухонной 800 с 3 ящиками (5) (Алебастр )
₽3 500-5 000
ООО "АЛМАЗ" 🇷🇺
Часто задаваемые вопросы
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.