Wave gearmotor MV3

Motor-reducers wave gear type MV3 of flanged and on feet versions are installed
horizontally and vertically (output shaft downwards) and are used as a drive for general mechanical engineering applications
for general mechanical engineering applications.
The gearmotors are designed for continuous operation on AC mains with a frequency of 50 and 60 Hz.
frequency 50 and 60 Hz, rated voltage 220, 380 V or, upon agreement with the manufacturer, for other standard voltages, under the following conditions
other standard voltages under the following conditions:
Constant and alternating load in magnitude (within the permissible torque) and
direction;
Operation for long periods of time and with periodic stops;
Output shaft rotation in any direction;
Air dustiness not more than 10 mg/m3;
Altitude above sea level 1000m;
Climatic execution U(N) (moderate climate), category of placement 3 (operation in rooms where temperature and humidity fluctuations are not higher than 10 m).
premises, where temperature and humidity fluctuations are considerably less than in the open air, operating temperature of the environment from
air, operating ambient temperature from -45 to +40 °?, or T (tropical...).