Universal Milk Electric Pump NCY-1 for Efficient Liquid Transfer

Designed for pumping milk, water, washing and disinfectant liquids with temperature not exceeding +75°C. Structurally NCU-1 is designed to work as part of the milking unit and outside it. As washing and disinfecting liquids use only those liquids that are designed for washing of milking units.

Operation in conditions: -temperature in the working area from +5° C to +45°; -relative air humidity not more than 98%. Unit designation: NCU-1-6-U2, where: 1-order number of development, 6-volume supply in m3/hour, U2-climatic execution Brief characteristics (basic): -working position horizontal; -consumable power 700 W; -voltage - 380V; -frequency of alternating current 50 Hz; By design the electric pump is centrifugal, single-stage, cantilever-monoblock with open 2-blade impeller. The working chamber of the pump is hermetically sealed.

Leakage of working liquid through the shaft mechanical seal is allowed not more than 30 cm3/hour (10 drops per min.)....