Teacher's desk (working table with a working head) FrStP 1.12

The frame of the table has an all-welded construction. The side supports are L-shaped and consist of a 40mm diameter metal pipe with a thickness of 1.2mm and a crosspiece made of 40x25mm profile pipe with a thickness of 1.5mm. On the side supports in the area of the lintel a crossbar 40x25mm 1.5mm thick is welded. In the rear part of the frame to the two supports two crossbeams of metal flat-oval tube with a cross-section of 30x15mm 1.5mm thick and on each side two plates 35x30mm 2mm thick are welded to pipes with a diameter of 40mm. The legs of the table frame are fitted with an adjustable support with a swivel joint. It is designed for a pipe with a round cross-section with a diameter of 40 mm. It has a round base with a diameter of 80 mm. The angle of inclination is up to 45°. All visible holes in the pipe are covered with plastic plugs. The frame is powder coated. Cover LDPE 22mm The table cover has a plug with a hole for wires. LDPE 16mm