STANDARD Single-seat pupil's table with adjustable parameters of height and inclination of cover, type 2

The table is made on a metal frame from thin-walled steel pipes with the use of 16mm thick 16mm E1 emission class LDFP. Elements of the table made of chipboard are lined with impact-resistant PVC edge 0,4-2mm. The edges of the cover are rounded with a radius of 30mm. The table elements made of laminated chipboard are faced with impact-resistant PVC edge 0.4-2mm. Fastening of the headboard to the frame with the help of 7x70mm Euroscrews. The cover is fixed to the frame with M6 screws through card hinges and a tilt lock, which allows you to install it at an angle from 0 to 19? with fixation in several intermediate positions with a step of 2-3?. The frame is made of steel profiles 20x20x1.2mm and 25x25x1.2mm, forming a telescopic structure so that its height can be set in three height positions, secured with eight M6 screws. The metal frame is painted with protective polymer powder enamel. The pipe ends are covered with plastic plugs, plastic supports are built into the base of the frame. There are metal hooks on the sides of the table.