STANDARD Pupils' two-seater table for chemistry room with constant parameters, type 1

The table is made on a metal frame of thin-walled steel pipes with the use of 16mm thick LDFP of emission class E1 of wood textures. The surface of the table is lined with chemically moisture-resistant plastic. The edges of the cover are rounded with a radius of 30 mm. Elements of the table made of chipboard are lined with impact-resistant PVC edge 0.4-2mm. Fastening of the headboard to the frame using 7x70mm euro screws. The cover is fixed to the frame with M6 screws through metal lugs, which provides the table with a smooth surface. The cover is attached to the bottom of the table by eccentric ties to the cabinet for sanitary ware, assembled on 7x50mm euroscrews. The table is equipped with a plastic mini-sink, a mono-mixer and a corrugated pipe for drain installation. The frame is made of steel profile 25x25x1,5 mm, painted with protective polymer-powder enamel. The pipe ends are covered with plastic plugs, plastic supports are built into the base of the frame. There are metal hooks on the sides of the table. It is produced in three height groups (5, 6, 7)