Single Student Desk with Durable Surface for Classroom Use

The table top and front panel of the table are made of 16mm chipboard. The table top can also be made of chipboard with plastic coating 26mm thick. The table top ends are covered with 2mm thick PVC edgebanding.

The ends of the front panel are covered with 0.5mm thick PVC edging. Metal frame is made of 25x25 mm square section profile with wall thickness not less than 1.2 mm and covered with powder paint resistant to chemical and mechanical influences. The free ends of the pipes are fitted with plugs made of impact-resistant polymers.

The frame of the table has polymer feet to prevent damage to the floor covering. All metal fixing fittings are hidden inside the pipe to extend the life of the product. The front fixing on the table top is concealed (threaded bushings and M6 bolts).

Rear fixing on the worktop is through-hole (furniture bolt with nut). The front panel is attached to the frame by furniture bolts with nuts. There are 2 briefcase hooks in the design.

The table has colour marking in accordance with the height.