Single-seat adjustable pupil's table

The table top and the front panel of the table are made of 16 mm chipboard or the table top can be made of 26 mm thick plastic-coated chipboard. The table top ends are covered with 2mm thick PVC edgebanding. The ends of the front panel are covered with PVC edgebanding with thickness of 0.5 mm. 0,5 mm. The metal frame is made of 25x25 mm and 20x20 mm square section profile with wall thickness not less than 1.2 mm and covered with powder paint resistant to chemical and mechanical influences. At the free ends of the pipes there are plugs. The table frame has polymer footrests to prevent damage to the floor covering. All fixing fittings on m/frames are hidden inside the pipe to prolong the service life of the product. Front fixing on the table top is concealed (threaded bushings and M6 bolts). Rear fixing on the table top is through-hole (furniture bolt with nut). The front panel is fixed to the frame with furniture bolts and nuts. Height adjustment is made by means of screws with Erickson nut. 2 briefcase hooks.