Safety harness with integrated belt for holding and positioning "Alpha 2.5", article number vnt 425.

A structurally simple harness designed to protect against falls from height. It is used when working in the support space as part of restraint and positioning systems, as well as for safe fall arrest.
The harness is made of tape with retroreflective thread, which is necessary when working in conditions of limited light and visibility.
The design of the harness ensures optimal load distribution on the leg girdles and shoulder straps at the moment of stopping a fall.
The front point requires mandatory locking, as it is made according to the A/2x2 scheme. The strap of the safety point loops is protected from abrasion by a polymer protector.
The safety point located on the back can be adjusted to the user's height. It can be shifted vertically on the X-shaped shoulder straps to adjust the correct position.
The size of the harness is adjusted by 4 split buckles: two located on the leg straps, one on the waist and one on the chest. The chest buckle also prevents the shoulder straps from falling off the user while working.
The wide girdle on the waist belt is convenient for long-term use of the harness. It is made of high-tech triplated material with moisture-wicking 3D mesh.
It is colour coded for easy donning.
The design has a jerk indicator.
The belt has loops for attaching tools and pouches.
For users whose weight together with individual equipment does not exceed 150 kg.
Attention! Workers weighing between 100kg and 150kg (together with equipment) should build safety systems with a jerk factor of 1 or less.