"Rimini Ice" AFE-02.CG, Bed 1.5 bunk (1200 mm) from the set of modular furniture Rimini Ice.

Beds (AT4, AR4), (AT3, AN1, AN4), (AP4), (AFE, AS3), (AQ4), panel construction. Mattress width is respectively 1800 mm, 1600 mm, 1400 mm. , 1200 mm. and 900 mm. The body of the beds is formed by the headboard and footboard, connected by longitudinal columns. The centre longitudinal support is fixed in the middle of the bed (not in beds AQ4, AS3). Coniferous lumber bars are fixed on the support and the king posts: on the support - on both sides, on the king posts - on the inner side. A flexible base is laid on the bars, which is a bent-glued laminated plate made of husked veneer. The bent-laminated plates with plastic tips at the ends are fastened along the length of the bed with fabric tape using metal staples. The body of the bed is assembled on metal corners with screws and euro screws. Longitudinal bars made of softwood lumber are fastened to the longitudinal boards and the centre support with screws and glue. The height of the king rail and the volume of the under-bed space allow the installation of a drawer G86 or G99.