Pupil's table two-seater adjustable with adjustable slope of the table top

The table top and front panel of the table are made of 16mm LDF. The ends of the table top are covered with 2mm thick PVC edgebanding. The ends of the front panel are covered with 0.5mm thick PVC edgebanding. The metal frame is made of 25x25 mm and 20x20 mm square section profile with wall thickness not less than 1.2 mm and covered with powder paint resistant to chemical and mechanical influences. At the free ends of the pipes there are plugs made of impact-resistant polymers. The frame of the table has polymer feet to prevent damage to the floor covering. All fixing fittings on the metal frames are hidden inside the pipe to extend the life of the product. The front fixing on the table top is concealed (threaded bushings and M6 bolts). Rear fixing on the table top is through (furniture bolt with nut). The front panel is fixed to the frame with furniture bolts and nuts. Height adjustment is made by means of screws with Erickson nut. Step angle adjustment from 0 to 75....