Pupil's table , AGAT 01.03.11.02 (two-seater, adjustable)

The frame of the table has a welded construction of 2 supports consisting of a flat-oval tube section 45x25mm thick 1.5mm and 2 traverses section 30x15mm thick 1.5mm.To the traverses in the middle of the frame is welded hanging support of tube 40x20mm thick 1.5 mm.And has two bent adjustable lower support legs made of 40x20mm pipe with a thickness of 1.5mm.Pipe 45x25mm has 4 holes and transition tube when fixing the pipe in the pipe. At the bottom of the table leg on the outer side of the bend is welded support angle plate for further fixation of the plastic footrest. The plate measures 30x35mm and is 2mm thick with a through hole. ?. 2 hooks. All visible holes in the pipe are closed with plastic plugs.The frame is painted with powder paint.Cover LDFP y 22mm.End surfaces of the table top, pencil case are covered with polypropylene 5 mm thick. The polypropylene edge and the pencil case are made by casting method, tightly fit and repeat all contours of the table top.LDPE 16mm with aluminium profile insert