Pupil's table AGAT 01.03.03.02.02 (single-seat, adjustable)

The frame of the table has a welded construction of 2 bent supports, consisting of flat-oval pipes with a cross-section of 45x25x1,5mm and 2 traverses with a cross-section of 30x15x1,5mm, and 2 bent lower adjustable pipes with a cross-section of 40x20x1,5mm. The 45x25mm pipe has 4 holes for height group adjustment. Additionally, a plastic adapter sleeve is installed when fixing the pipe in the pipe. 2 hooks. All visible holes in the pipe are covered with plastic plugs. To the metal corner, on the outer side of the bend of the table support leg, a plastic corner support 110x95x25mm. is fixed, and on its front edge is a plastic tip 65x45x25mm. LDPE cover 22mm. The end surfaces of the table top and the pencil case are covered with 5 mm thick polypropylene. The polypropylene edge and the pencil case are made by casting, tightly fit and repeat all the contours of the table top. 16mm LDPE arch with aluminium profile insert