Pupil's table AGAT 01.03.03.01 (single-seat, adjustable)

The frame of the table has a welded construction of 2 bent supports consisting of flat-oval tubes with a cross-section of 45x25x1,5mm and 2 crossbeams with a cross-section of 30x15x1,5mm, and 2 bent lower adjustable tubes with a cross-section of 40x20x1,5mm. The 45x25mm pipe has 4 holes for height group adjustment. Additionally, a plastic adapter sleeve is installed when fixing the pipe in the pipe. 2 hooks. All visible holes in the pipe are covered with plastic plugs. To the metal corner, on the outer side of the bend of the table support leg, a plastic corner support 110x95x25mm. is fixed, and on its front edge is a plastic tip 65x45x25mm. The frame is painted with powder paint. LDPE cover with thickness of 22 mm. The end surfaces of the table top and the pencil case are covered with polypropylene with thickness of 5 mm. The polypropylene edge and the pencil case are made by casting method, tightly fit and repeat all contours of the table top. 16mm LDPE arch with aluminium profile insert