Pupil's chair AGAT 01.02.02.03

The upper part of the chair is made of flat-oval pipe section 40x20x1.5mm with welded plate 60x30x2mm .The base of the seat frame is made of flat-oval pipe U-shaped section 30x15x1.5 mm and welded between the upper posts of the chair.On the base of the seat frame 2 plates 40x30x2 mm are welded to fix the seat.The lower part of the frame is made of 2 bent tubes of flat-oval cross-section 45x25x1.5 mm .A plastic adapter sleeve is installed when fixing a pipe in a pipe.In the inner part of the radius bend there is a "stream" of rigidity.On the outer side of the bend of the chair leg a support corner made of a metal plate 107x13x1.5mm is welded.All visible holes are closed with plastic plugs.To the metal corner, on the outer side of the bend of the chair leg, a plastic support 145x120x30mm is fixed. On the front edge of the metal supports of the lower part are dressed plastic tips 65h60h30mm.Material back and seat polypropylene.The frame is painted with powder paint