Pupil's chair AGAT 01.02.01.07

The frame is made of a solid bent flat-oval tube with cross-section 40x20x1,5 mm. On the upper part of the frame there is a welded structure of two 3mm thick plates and two 18mm diameter pipes 1.5mm thick to fix the seat. The upper support of the all-bent frame has an internal radius of 65mm and a bending angle of 90°. The side supports have an internal radius of 70mm and a bending angle of 70° at the rib. The front support part of the all-bent structure has a welded lintel made of 30x15x1.5mm flat-oval tube. On the side supports on the outer side of the chair frame bend, a support angle plate is welded to further fix the plastic footrest. All visible holes in the pipe are covered with plastic plugs. The frame is powder painted. Seat dimensions: 425x450x425mm The seat and backrest are a solid moulded construction made of heavy-duty polypropylene with 6 stiffening ribs. The seats are fitted with special trapezoidal shaped plugs that go into the body of the fixture.