Pump SM200-150-400 and electric pump units on its basis

Centrifugal pumps SM and electric pump units on their basis, are designed for pumping urban and industrial wastewater, and other non-aggressive liquids (including with an admixture of petroleum products not more than 2%) with a density up to 1050 kg/m3 with pH = 6 - 8.5, with a temperature from 263K (minus 10 ° C) to 353K (80 ° C) and with the content of abrasive particles up to 5 mm. not more than 1 per cent by mass. The maximum concentration of pumped mass is 2%. The maximum gas content in the pumped medium is 5%.
CM type pumps are centrifugal, horizontal, cantilever pumps.
The pump casing is a cast iron casting with pump inlet and outlet, spiral-ring outlet and support legs. The pump inlet is located along the axis of rotation, the outlet is vertically upwards and is located in the same plane as the axis of rotation of the wheel. The design of the outlet is either round or square.
A bracket is attached to the pump casing by studs. The bracket is connected to the casing...