Power Distribution Unit with 7 Outputs - LPCU-71SE for Efficient Power Management

Power distribution device for 7 IEC C13 connectors. The input is made on powerCON 16A connectors. All output connectors are numbered and located on the rear panel.

Each output has an LED indication. The contacts of the output relays are in the normally open state. When switched on, the outputs are energised sequentially at set intervals.

Remote control via Ethernet, you can switch off and switch on any output, sign each output, get information about the voltage value at each input, total current consumption of devices connected to the distributor, temperature and relative humidity of the room where the distributor is installed (sensor is supplied separately). The side fixing angles can be turned 180° and the device itself is fixed on them flush or with a recess at 57 and 112 mm from the front part of the fixing angle. An unloading bar and input cable connectors are included in the scope of delivery.

The warranty period is 36 months.