Low Laboratory Table with Cabinet Typ 1 for Efficient Workspace Organization

Size 1200x600x750mm. Rack724x568mm. The rack (sidewall) has a C-shape, the upper horizontal part is made of cold-rolled pipe 30x30x1,5mm.The lower horizontal part is made of cold-rolled pipe 60x30x1,5mm.The vertical part consists of 2 cold-rolled pipes 30x30x1,5mm and a box.The box is bent from cold-rolled sheet metal 0.7mm thick with overall dimensions of 615x145mm with a border on the pyrimetre 15mm.The rack (sidewall) is welded, but without visible weld seams.All visible end holes of profile pipes are closed with plastic plugs.It has a rectangular shape.Tsarga is made of cold-rolled profile pipe cross-section 30x30x1,5mm.The box is bent from cold-rolled sheet metal 0,7mm thick and has dimensions 1076x480mm and perimeter edge 15mm.

The frame is 393x1136mm. It is made of cold-rolled profile pipe, section 30x30x1,5 mm. The table top is LDFP 22mm.

Bottom and top covered with plastic. 400x538x476mm LDFP 16mm.