Laboratory bench-table type 2, low

Size 1500x600x750mm.Rack 724x568mm. It has a C-shape, the upper horizontal part is made of cold-rolled pipe 30x30x1,5 mm. The lower horizontal part is made of cold-rolled pipe 60x30x1,5mm.The vertical part consists of 2 pipes 30x30x1,5mm and a box. The box is bent from cold-rolled sheet metal 0.7mm thick with overall dimensions 615x145mm with a perimeter edge of 15mm.The rack is welded, but without visible welds. All visible end holes of the profile pipes are closed with plastic plugs. Pulpit 1436x540mm. It has a rectangular shape. The headboard is made of cold-rolled profile pipe 30x30x1.5mm. The box is bent from cold-rolled sheet metal 0.7mm thick and has dimensions 1376x480mm and a perimeter edge 15mm. The frame is 1436x363mm. It is made of cold-rolled profile pipe with cross-section 30x30x1,5mm. Table top LDFP 22mm.Bottom and top covered with plastic.Cabinet hanging 1434x538x476mm with drawers and doors.LDFP 16mm