Kitchen cabinet

Cabinet consists of a frame: side parts, rear part, lower part and upper part made of chipboard.
The parts are fastened to each other by means of screws (screw 8) on PVA glue or equivalent eccentric screws.
On the back wall a hole with a diameter of 60 mm is cut for wires.
A plug in the colour of the chipboard is provided.
Five shelves are installed inside the frame on a metal shelf holder.
The side panels have shelf height adjustment.
Two doors made of light fibreboard are attached to the frame from above and below.
Fastening is made on overhead metal furniture hinges.
Each door is fitted with a metal handle "staple" of geometric shape in the cross-section of a square.
There are four white-coloured overhead dampers for smooth closing. The cabinet must be equipped with furniture ties for its installation and fastening in the group and height-adjustable supports.
The front legs of the cabinet shall be fitted with a plinth made of chipboard. It is fixed on a PVC clip.
The edges for the chipboard must be made of PVC.