Available for Import

IP212-54R "DIP-54R" smoke detectors opto-electronic point fire detectors

Fire Alarm Detectors

Manufacturer:

Price: Request Quote

Bulk pricing available

FOB, CIF & EXW terms available

Email Inquiry

Key Highlights

Made in Russia - engineered for durability
Suitable for challenging environments
Lower cost of ownership than European alternatives
Bulk orders available with volume discounts
Documentation and customs clearance assistance provided

Available Models

IP212-54T "DIP-54T" smoke detectors opto-electronic point smoke detectors IP212-54R1 "DIP-54R1" smoke detectors opto-electronic point smoke detectors ??212-54T-?? "DIP-54T-??" smoke detectors opto-electronic point smoke detectors

Description

Wire point detector is designed to detect fires accompanied by smoke. The design of the detector provides shielding of the optical chamber fine-mesh mesh and a mechanical device to monitor performance. It has a four-wire connection. The detectors belong to the point, recoverable (multiple action) active (current-consuming) smoke optical-electronic fire detectors. The principle of detectors operation is based on registration of optical (infrared) radiation reflected from smoke particles. The detectors are connected to the control panels using a four-wire fire alarm loop (hereinafter referred to as the loop). The detector ??212-54? triggering signal is formed in the form of closing of the signal line (zone) of the four-wire loop.

Specifications

Sensitivity of the detector corresponds to the smoke environment with optical density, dB/m 0.05...0.2

Inertia of detector operation from the built-in test device, not more than 5

Detector supply voltage 8...36 V

Current consumed by the detector in standby mode at 12 V supply voltage, typical value 0.00013 A

Current consumed by the detector in standby mode at a supply voltage of 36 V, not more than 0.00015 A

Current consumed by the detectors in the triggered state, not exceeding 0.01 A

Duration of interruption (polarity reversal) of supply voltage ensuring resetting of the triggered state, not less than 2

Electrical resistance value between contacts "1" and "4" of the detector in standby mode, not less than 500000 ohm

Magnitude of electrical resistance between contacts "1" and "4" of the detector in the triggered state, not more than SBVVBG ohm

Maximum permissible switched current between contacts 1" and "4" (output circuit of the opto-tolerance) 0.1 A

Insulation resistance between output circuits of the optorele and power supply circuits, not less than 500000 ohm

Weight, not more 0.12 kg

Protection degree of the shell against penetration of solid bodies in accordance with GOST 14254, IP 40

Note: All specifications are provided by the manufacturer and may be subject to change. Please contact us to confirm the latest specifications before placing your order.

Save Your Time

Share your requirements for a quick response!

Looking for

Quantity

Your mobile

Instant response in 15 minutes

Best wholesale prices guaranteed

Direct from manufacturer

Delivery & Payment

Shipping Terms

FOB Novorossiysk, Russia CIF Available to major ports worldwide EXW Manufacturer's facility, Russia

Delivery Time

Sea freight: 30-60 days (depending on destination) Air freight: 14-21 days (for urgent orders)

Payment Methods

Letter of Credit (L/C) Wire Transfer (T/T) Escrow Services

Categories