Available for Import

IP212-52 "IPDL-52" linear optical-electronic smoke detector

Fire Alarm Detectors

Manufacturer:

Price: Request Quote

Bulk pricing available

FOB, CIF & EXW terms available

Email Inquiry

Key Highlights

Made in Russia - engineered for durability
Suitable for challenging environments
Lower cost of ownership than European alternatives
Bulk orders available with volume discounts
Documentation and customs clearance assistance provided

Linear smoke detector for the protection of premises of large area or length. Distinctive features of this modification: two-position version (receiver + transmitter); working distance from 8 to 100 metres; wide range of angles of adjustment. Receiver and transmitter have the same design and are made in the form of a rectangular plastic housing with a board with radio elements and optical system installed inside it. Along the inner surface of the case there is an electric screen covering both the board with radio elements and the optical system. The optical system is protected against penetration of insects and dust, and the protection is provided against penetration both from outside the enclosure and from its internal space. The optical system consists of two optical units isolated from each other, i.e. it has a two-lens (two-channel) design.

Technical Specifications

Range of possible distances between receiver and transmitter	8...100 m
Maximum possible width of the space to be protected by one detector	9 m
Maximum possible room area protected by one detector	900
Detector power supply voltage (receiver and transmitter)	10...30 V
Current consumed by the detector in the "Normal" mode (when the transmitter is powered from the receiver via communication line)	0.0025 A
Current consumed by the receiver in "Normal" mode (when the transmitter is powered from a separate source) not more than	0.0025 A
Current consumed by the transmitter when powered from a separate source (in any operating mode) not more than	0.0012 A
Current consumed by the receiver in the mode of forming the output signal "Attention", not more than	0.011 A
Current consumed by the receiver in the mode of forming the output signal "Fire", not more than	0.04 A
Current consumed by the receiver in the mode of forming the output signal "Fault", not more than	0.011 A
Current surge value at formation of the output signal "Attention"	0.00675...0.00825 A
Maximum possible duration of interruptions or polarity reversals of the supply voltage that do not affect normal operation	0.1
Minimum permissible power interruption interval frequency	4
Minimum required duration of power failure to ensure resetting of recorded notifications	2
Typical inertia of detector operation (for "Attention" and "Fire" signals)	5
Maximum inertia of detector actuation (by signals "Attention" and "Fire")	10
Inertia of "Fault" notification fixation in the "Fault - memory" mode	3...5
Inertia of "Fault" notification fixation in the "Fault - tolerance" mode	3...5
Inertia of "Fault" notification fixation in the "Fault - Beam" mode	1.5...2.5
Inertia of "Fault" notification fixation in the "Fault - synchronization" mode	40...70
Inertia of "Fault" notification fixation in the "Fault - failure" mode	40...70
Inertia of "Fault" notification fixation in the "Fault - excess" mode	40...70
Inertia of "Fault" notification fixation in the "Fault - Reduction" mode	40...70
Typical value of resistance of closed contacts of optorelay outputs	15 ohm
Maximum value of resistance of closed contacts of optorelay outputs	25 ohm
Maximum permissible current value switched by the optorelay outputs	0.1 A
Maximum permissible voltage value switched by the optorelay outputs	100 V
Limit value of sensitivity compensation at optical beam power reduction	3
Maximum permissible value of wire resistance of the communication line between the receiver and the transmitter	220 ohm
Weight of receiver and transmitter separately without adjusting device, not more	0.4 kg
Weight of receiver and transmitter separately with alignment device, not more than	0.6 kg
Degree of protection of the shell according to GOST 14254, IP	40

Note: All specifications are provided by the manufacturer and may be subject to change. Please contact us to confirm the latest specifications before placing your order.

Shipping & Payment Information

Shipping Terms

FOB: Novorossiysk, Russia
CIF: Available to major ports worldwide
EXW: Manufacturer's facility, Russia

Delivery Time

Sea freight: 30-60 days (depending on destination)
Air freight: 14-21 days (for urgent orders)
Production lead time: 30-90 days (depending on order size)

Payment Methods

Letter of Credit (L/C)
Wire Transfer (T/T)
Escrow Services

Order Minimums

We work with orders starting from 1 container
You can mix different products in one container
Volume discounts available for larger orders

Customs & Documentation Support

We provide comprehensive assistance with all export documentation, customs clearance, and logistics arrangements. Our team has extensive experience facilitating international trade with businesses in Africa, Middle East, Asia, and Latin America.

Contact Our Import Specialists

WhatsApp (Recommended)

For fastest response and immediate assistance with pricing, availability, and ordering.

+971 58 657 4796

Email

For detailed inquiries, documentation requests, and formal communications.

Send Email Inquiry info@tonzar.com

Request Call Back

Schedule a consultation with our import specialists at your convenience.

Business Hours

We're available to assist you during the following hours:

Monday - Friday: 9:00 AM - 6:00 PM (GMT+4)
Saturday: 10:00 AM - 2:00 PM (GMT+4)
Sunday: Closed

Our WhatsApp support is available outside business hours for urgent inquiries.

Categories

Language

Quick Links

IP212-52 "IPDL-52" linear optical-electronic smoke detector

Key Highlights

Technical Specifications