Intramedullary humerus pins Ø 6,7 mm, length 220 to 300 mm in 10 mm increments, article number 630.XXX

Application: for intramedullary osteosynthesis of proximal humerus fractures and fractures extending into the diaphysis. Bending in the sagittal plane. Universal design for left and right limbs. For static locking of the pin - possibility of insertion of locking screws in the proximal and diaphyseal parts with a diameter of 3.5 mm, oblique ascending hole in the proximal part. For static and/or dynamic locking of the pin, there is an oblong locking hole in the proximal part. For attaching the main guide, there is an internal M5.5 hole in the end of the proximal part. The distal end is tapered. Laser marking of diameter and length on the product. Sterilisation required.