High-frequency twisted pair cable 16pr F/UTP-5e 24 AWG PE

Construction: Cores of soft copper wire in polyethylene insulation, twisted into pairs with steps not equal and not multiples of each other.Pairs are twisted into the core by unidirectional twisting.It is allowed over the twisted core of the cables overlapping belt insulation of PET tape.On top of the core there is a screen made of aluminopolymer tape with a contact conductor made of tinned copper wire 0,4 mm in diameter. On top of the screen there is a sheath made of light-stabilised polyethylene (HDPE) with an external load-carrying element twisted from seven galvanised steel wires, connected by a jumper. Field of application: The cable is designed for horizontal and vertical external laying on the walls of buildings, suspension on overhead communication lines and pulling between supports or buildings, for operation in the frequency range up to 100MHz (category 5 and 5e according to GOST R54429-2011) and ISO/IEC 11801.Cables are manufactured in climatic version UHL, placement category 1,2 according to GOST15150.